Gas Cooktop Keeps Clicking Without a Flame

Click-click-click with no flame wastes gas and frays nerves. Fisher & Paykel sealed burners still need a dry spark path and correct cap alignment.

Stop after a few attempts if ignition fails. Flooding the area with unburned gas is the real hazard.

Dry and Align First

After cleaning, burner caps must sit in their dimples. Wet igniters from spills spark endlessly. Dry gently and wait before retrying.

Port and Cap Cleanliness

Clogged simmer ports light poorly. Clear debris with soft brushes—not paper clips shoved deep into valves.

• Re-seat every cap after scrubbing.
• Dry igniter ceramic tips carefully.
• Confirm the gas shutoff behind the range is open.
• Try another burner to see if the problem is global.

When All Burners Fail

A household gas supply issue, failed spark module, or wiring fault can kill every burner at once. That pattern deserves a service visit rather than more knob twisting.

Safety note: If you smell gas strongly, do not keep sparking. Ventilate, avoid electrical switches, shut gas off if reachable safely, and get professional help. No DIY gas-line or orifice work.

Uneven Flames After Ignition

Yellow tipping, lifting flames, or soot on pans mean combustion is wrong even if ignition eventually succeeds. Those symptoms also need technician attention.

Frequently Asked Questions

Why does clicking continue after the flame lights?

Moisture or a grounded igniter wire can keep the module sparking; release the knob and stop if it persists.

Can I light with a match meanwhile?

Only if your manual allows temporary match lighting and you detect no strong gas buildup. Prefer professional repair soon.

Do LP and natural gas models fail differently?

Orifice sizing differs; conversions must be done correctly by qualified people—not improvised.

For stubborn ignition problems, reach an independent gas appliance technician instead of holding the knob down longer.