Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Model Reference

Fisher & Paykel CI365DTB4 Induction Cooktop

36-inch induction cooktop — repair reference for zone and detection faults.

Model number CI365DTB4
Appliance category Induction Cooktop
About this model

Model overview

Induction cooktop for built-in installation. Zone heating and cookware-detection issues for this family are listed as a repair reference.

At a glance

Model CI365DTB4
Appliance Induction cooktop
Common symptoms zone heating problems, cookware not detected
What you can check Note which zone fails and whether the cooktop misses cookware. Read the model number from the label and write down any code shown.
When to call a technician If a zone keeps heating poorly or cookware is still not detected, schedule a technician. Provide the model number and which zone is affected.

Specifications

Dimensions Width is 35 7/16 inches.
Features Five induction cooking zones are provided. Two SmartZones support larger cookware. PowerBoost is included. Pan detection is provided.
Controls Touch-and-slide controls adjust cooking heat. Nine heat settings are available.
Finish Black glass cooking surface.

What sets the CI365DTB4 apart

The CI365DTB4 is a black glass induction cooktop with five cooking zones, two of which link as SmartZones for larger cookware. Touch-and-slide controls set the heat across nine settings, and PowerBoost gives a zone extra heat for a short time. Pan detection keeps a zone off until suitable cookware is placed, and its 35 7/16-inch width is the measurement to check against the cabinet opening.

Service notes for the CI365DTB4

On an induction cooktop, a zone that will not heat is checked for cookware first, since pans without a magnetic base are not detected, and a technician confirms the pan is suitable before anything else. Error codes on one zone point to that zone's sensor or its power board, so note which zone shows the code and where the slider sat. Touch controls that flicker or lock out are often a spill or moisture problem on the glass, and the owner can safely wipe the surface and let it dry before testing again. A SmartZone that will not link is checked at the zone wiring. Record the code and the power setting at the time it appeared.

Known problems

Common issues for this model

  • Zone not heating
  • Cookware not detected
  • Error code on display
Helpful notes

Troubleshooting resources

Confirm cookware is induction-compatible before booking.

Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis