Fisher & Paykel CDV2-304N-N Gas Cooktop
30-inch natural-gas cooktop; owners most often report igniters that keep clicking or a burner that will not hold heat.
Model overview
The CDV2-304N-N is a 30-inch natural-gas cooktop from Fisher & Paykel in the Professional line, with four sealed dual flow burners. The front-left burner delivers 20000 BTU, and automatic re-ignition relights a burner if its flame goes out. Continuous surface grates run across the top, and they are dishwasher safe. Halo-illuminated metal dials mark each burner setting. Owners in the metro areas we serve frequently call about an igniter that keeps clicking or one zone that will not heat. For the booking form, name the zone that fails, give the complete number from the rating label, and include any code shown on the cooktop.
At a glance
| Model | CDV2-304N-N |
|---|---|
| Appliance | Gas Cooktop, 30-inch, Natural Gas |
| Common symptoms | error code on one zone; touch controls flicker or lock out; igniter keeps clicking; burner or zone will not heat |
| What you can check | Note which burner or zone fails and whether the others still work normally. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Width: 30 inches. |
|---|---|
| Power | Front-left burner output: 20000 BTU. Supply: 120 V, 60 Hz. |
| Features | Four Sealed Dual Flow Burners. Automatic re-ignition. Continuous surface grates. |
| Controls | Halo-illuminated metal dials. |
| Care | Dishwasher-safe grates. |
What sets the CDV2-304N-N apart
Sealed dual flow burners give this cooktop a different character from a standard open burner: the flame spreads through two rings, so a pan gets heat around its base instead of one spot. The front-left burner is rated at 20000 BTU, a high-output position for searing or fast boiling. Continuous grates let a cook slide a pan across the surface without lifting it.
Service notes for the CDV2-304N-N
A burner that will not heat or an igniter that keeps clicking usually points to a clogged port, a wet burner cap or a faulty igniter, and a technician checks the port and cap before the igniter. Automatic re-ignition that fails on one burner is often a sensor or a wire connection at that position. An error code on one zone points to that burner's valve or control, so the code matters on the booking form. Before the visit, let the grates cool, lift each cap, clear the ports with a needle or toothpick, and dry them fully. If you smell gas at any time, leave the room, leave the knobs alone and call the gas utility first.
The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
What is the output of the front-left burner on the CDV2-304N-N?
The front-left burner is rated at 20000 BTU, which is worth noting on the booking form if it fails.
Does the CDV2-304N-N re-ignite automatically?
Yes. Automatic re-ignition relights a burner if its flame goes out while the knob is still on.
Where do I find the full CDV2-304N-N model number?
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Copy every letter and digit, including the ones at the end.
Do you repair the Fisher & Paykel CDV2-304N-N at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Error code on one zone
- Touch controls flicker or lock out
- Igniter keeps clicking
- Burner or zone will not heat
Recommended repair service
Gas Cooktop Repair
Gas burners clicking without ignition or heating unevenly? We diagnose Fisher & Paykel gas cooktops safely.
Troubleshooting resources
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.