Fisher & Paykel CDV3-304H-N Natural Gas Cooktop
Stainless gas cooktop with metal dials; trouble usually shows as a clicking igniter or a zone that stays cold.
Model overview
The CDV3-304H-N is a 30-inch natural gas cooktop from Fisher & Paykel. It has four sealed Dual Flow burners with a combined output of 65,000 BTU, and the front-left burner delivers 20,000 BTU. A single-sheet sealed surface keeps spills away from the cabinetry below, and halo-illuminated metal dials mark each control. Width is 30 inches, and the finish is stainless steel. Among the metro areas we serve, owners often describe a zone that stays cold after the dial is turned. When you book, give the full model number from the rating label, name the burner involved, and include any code shown.
At a glance
| Model | CDV3-304H-N |
|---|---|
| Appliance | 30-inch Natural Gas Cooktop |
| Common symptoms | touch controls flicker or lock out; burner or zone will not heat; error code on one zone; igniter keeps clicking |
| What you can check | Note which burner or zone fails and whether the others still work normally. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Width: 30 inches. |
|---|---|
| Power | Front-left burner: 20,000 BTU. Total cooktop output: 65,000 BTU. |
| Features | Four sealed Dual Flow burners. Continuous cooking grates. |
| Controls | Halo-illuminated metal dials. |
| Care | Single-sheet sealed cooking surface. |
| Finish | Stainless steel finish. |
What sets the CDV3-304H-N apart
The single-sheet sealed surface has fewer seams than cooktops built from separate pieces, which means fewer places for food to collect. Four burners at this total give a usable spread of heat from low simmer to high boil. Day to day, wipe the surface after each use so spills do not bake into the sealed edge.
Service notes for the CDV3-304H-N
Heat that never comes up on this cooktop often traces to a clogged port, a damp cap or a weak igniter, so a technician checks those before the gas valve. The owner can safely lift the grates, confirm each cap sits level, and turn every knob to off before reaching in. A dial that feels loose is frequently worn at its spindle, which is a repair rather than a cleaning job. Do not take the burner assembly apart. Note which position stays cold and whether the neighboring positions still light. Clicking without a flame suggests the spark path is faulty rather than the burner itself, which calls for a qualified repair.
The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
How wide is the CDV3-304H-N?
It measures 30 inches wide, so confirm the cutout size against the cabinet before ordering.
How much output do the burners total?
The four burners total 65,000 BTU, and the front-left burner delivers 20,000 BTU.
Where do I find the full CDV3-304H-N model number?
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Copy every letter and digit, including the ones at the end.
Do you repair the Fisher & Paykel CDV3-304H-N at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Touch controls flicker or lock out
- Burner or zone will not heat
- Error code on one zone
- Igniter keeps clicking
Recommended repair service
Gas Cooktop Repair
Gas burners clicking without ignition or heating unevenly? We diagnose Fisher & Paykel gas cooktops safely.
Troubleshooting resources
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.