Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Model Reference

Fisher & Paykel CE304DTB1 Four Element Electric Cooktop

Electric cooktop trouble usually shows as an error code on one zone or touch controls that lock out.

Model number CE304DTB1
Appliance category Cooktop
About this model

Model overview

The CE304DTB1 is an electric cooktop from Fisher & Paykel with four heating zones, including two dual elements, on a flat ceramic glass surface. It measures 29 1/2 inches wide and runs on a supply of 208 to 240 V. Touch and slide controls set each zone, and spill detection switches elements off if liquid reaches the controls. A minute timer is built in. In the metro areas we cover, owners most often report an error code on one zone or touch controls that flicker and lock out. When you book, give the full model number from the rating label, say which zone misbehaves, and include the code shown.

At a glance

Model CE304DTB1
Appliance 30-inch Four Element Electric Cooktop
Common symptoms error code on one zone; touch controls flicker or lock out
What you can check Note which burner or zone fails and whether the others still work normally.
When to call a technician If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Specifications

Dimensions Width is 29 1/2 inches.
Power Supply voltage is 208–240 V.
Features Four heating zones. Two dual elements. Spill detection switches elements off.
Controls Touch and slide controls. Minute timer.
Care Flat ceramic glass surface.

What sets the CE304DTB1 apart

Two dual elements give this cooktop a wider range of pan sizes than a single-element layout, and the slide control makes fine adjustments easy. The flat ceramic surface is smooth to clean, though it shows scratches over time. Day to day, spill detection is the reason a boil-over may shut a zone off mid-cook.

Service notes for the CE304DTB1

When a zone shows an error code, a technician checks the control board and the wiring to that zone before replacing the element, since a faulty sensor can look like a dead zone. The owner can safely confirm the cookware is flat and centered, the surface is dry, and nothing rests on the controls. Flickering controls often trace to moisture or a residue film, so clean the glass with a dry cloth. Do not pry at the glass or remove the cooktop. Note which zone shows the code and whether it appears at only one heat setting.

The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.

Frequently asked questions

How wide is the CE304DTB1?

It measures 29 1/2 inches wide, so check the cutout and clearances before installation.

What supply voltage does it need?

It is rated for 208 to 240 V, so confirm the circuit before connecting.

Where do I find the full CE304DTB1 model number?

Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Copy every letter and digit, including the ones at the end.

Do you repair the Fisher & Paykel CE304DTB1 at home?

Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.

Known problems

Common issues for this model

  • Error code on one zone
  • Touch controls flicker or lock out
Get it fixed

Recommended repair service

Gas Cooktop Repair

Gas burners clicking without ignition or heating unevenly? We diagnose Fisher & Paykel gas cooktops safely.

Helpful notes

Troubleshooting resources

Note which burner or zone fails and whether the others still work normally.

Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis