Fisher & Paykel DW24UT4I2 Integrated Tall Dishwasher
Integrated dishwasher trouble often shows as water left in the tub, a cycle that stops early or a leak code.
Model overview
The DW24UT4I2 is an integrated tall dishwasher from Fisher & Paykel that holds 15 place settings across an adjustable middle rack. It measures 23 1/2 inches wide and offers eight wash programs, with a three-stage filter that catches food before it reaches the pump. Auto Door Open drying helps dishes dry after a cycle, and capacitive touch controls sit on the front. A floor light shows cycle status. Across the metro areas we cover, the calls most often describe a cycle that stops early or will not start, or water left in the tub. When you book, give the full model number from the rating label, say when in the cycle it stops, and include any leak or error code shown.
At a glance
| Model | DW24UT4I2 |
|---|---|
| Appliance | Integrated Tall Dishwasher, 24-inch, Sanitize |
| Common symptoms | cycle stops early or will not start; water left in the tub after the cycle; dishes not getting clean or dry; leak or leak-protection code |
| What you can check | Note the cycle used, whether water is left in the tub, and any code or flashing light. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Width: 23 1/2 inches. |
|---|---|
| Capacity | Holds 15 place settings. |
| Features | Eight wash programs. Auto Door Open drying. Adjustable middle rack. |
| Controls | Capacitive touch controls. Floor-light cycle status indicator. |
| Care | Three-stage filtration. |
What sets the DW24UT4I2 apart
The integrated tall format leaves room for a full-size load, and the adjustable middle rack changes the upper space for tall items. Auto Door Open drying trades a warm finish for a quicker air dry. Day to day, the three-stage filter needs regular rinsing, since debris there often leads to drainage trouble.
Service notes for the DW24UT4I2
Water left in the tub usually points to a kinked drain hose, a clogged filter or a drain pump that is not clearing, and a technician checks those three before the control board. The owner can safely remove the lower filter stack, rinse it under running water, and check the drain hose for a sharp bend at the sink. Do not push objects into the spray arms or the tub drain. A leak-protection code often means water reached the base pan, so dry the floor and note where the water appeared. Record the program you ran and the point where it stopped.
The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
How wide is the DW24UT4I2?
It measures 23 1/2 inches wide, so confirm the opening matches the integrated space before installing.
How many place settings does it hold?
It holds 15 place settings, and the middle rack adjusts to fit taller items.
Where do I find the full DW24UT4I2 model number?
Check the rating label on the edge of the door or the side of the tub, visible when the door is open. Copy every letter and digit, including the ones at the end.
Do you repair the Fisher & Paykel DW24UT4I2 at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Cycle stops early or will not start
- Water left in the tub after the cycle
- Dishes not getting clean or dry
- Leak or leak-protection code
Recommended repair service
Drop-Door Dishwasher Repair
Full-size dishwasher not draining, not cleaning, or showing an error? We restore reliable Fisher & Paykel drop-door cycles.
Troubleshooting resources
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.