Fisher & Paykel OB30SDPTB1 Built-in Oven
Black single built-in oven with guided touchscreen; owners often call about a door that stays locked after a self-clean.
Model overview
The OB30SDPTB1 is a black built-in oven from Fisher & Paykel with 4.1 cu ft of capacity and 17 oven functions. Guided touchscreen cooking walks the owner through each program, and a food probe comes supplied for roasts. Three sets of full-extension sliding shelves reach eight shelf positions. Standard and light self-clean cycles keep the cavity manageable between uses. Owners across the metro areas we cover most often report a temperature that drifts from the setting or a door that stays locked after a clean. For the booking form, note the symptom, the whole model number printed on the data plate, and the error code on the display.
At a glance
| Model | OB30SDPTB1 |
|---|---|
| Appliance | Built-in Oven, 30-inch, 17 Function, Self-cleaning |
| Common symptoms | error code on the control panel; temperature off from the setting; fan, light or display not working; door lock stuck after self-clean |
| What you can check | Note the mode used (bake, convection, steam, self-clean) and any code on the display. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Capacity | Total capacity: 4.1 cu ft. |
|---|---|
| Features | 17 oven functions. Three sets of full-extension sliding shelves. Food probe supplied. Eight shelf positions. |
| Controls | Guided touchscreen cooking. |
| Care | Standard and light self-clean cycles. |
| Finish | Black finish. |
What sets the OB30SDPTB1 apart
The guided touchscreen is what separates this oven from a dial-based single oven, because each function leads the owner through its steps on screen. Three sets of full-extension shelves make a loaded tray easy to slide out without reaching into the heat. Its 4.1 cu ft cavity handles weeknight roasts and weekend baking alike.
Service notes for the OB30SDPTB1
A door that stays locked after a self-clean usually points to the lock motor or the latch sensor, and a technician checks the latch position before the lock itself. Temperature drift points to the oven sensor or the heating element, and the food probe is a useful reference when the owner checks the set point. An error code on the touchscreen often comes from the control board or a sensor connection, so copy it exactly. Before the visit, let the cavity cool fully, wipe the door glass, and run a short bake at a known set point to record the result. Switch the oven off at the breaker before opening any panel.
The model number is printed on the rating label, usually on the frame around the door opening, visible with the door open; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
How many shelf positions does the OB30SDPTB1 have?
It has eight shelf positions, with three sets of full-extension sliding shelves supplied.
Does the OB30SDPTB1 have a self-clean cycle?
Yes. It offers standard and light self-clean cycles, and the door can stay locked until a cycle ends.
Where do I find the full OB30SDPTB1 model number?
Check the rating label on the frame around the door opening, visible with the door open. Copy every letter and digit, including the ones at the end.
Do you repair the Fisher & Paykel OB30SDPTB1 at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Error code on the control panel
- Temperature off from the setting
- Fan, light or display not working
- Door lock stuck after self-clean
Related error codes
Fisher & Paykel Oven F203 and F603 Code: Software Error
F203 and F603 on the combi oven are general software errors; follow the cool-down reset, otherwise book service.
Fisher & Paykel Oven F225 Code: Cooling Fan Stall Error
F225 is a stalled cooling fan on the combi oven. Reset once cool; a second F225 means booking service.
Fisher & Paykel Oven F231 to F236 Codes: Electronic Hinge Error
F231 to F236 all mean electronic hinge error on the combi oven; the manufacturer gives no reset.
Fisher & Paykel Wall Oven F2XX Code: Power Board Fault
F2 followed by a sub-code (up to 21) is filed as a power board fault on wall ovens.
Recommended repair service
Oven Repair
Oven not heating, baking unevenly, or showing an error? We diagnose Fisher & Paykel ovens with a safety-first approach.
Troubleshooting resources
Note the mode used (bake, convection, steam, self-clean) and any code on the display.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.