Fisher & Paykel Series 9 Contemporary WB24SCX3 Warming Drawer
24" warming drawer from the Series 9 Contemporary line — model notes, common issues and related Fisher & Paykel warming drawer service.
Model overview
People who buy a warming drawer tend to be cooks who entertain, host large dinners or keep several dishes hot at once, and that habit matters for repair. A drawer that runs for hours at a low setting, or one that loads heavy trays again and again, can put extra strain on the heating element and the temperature sensor. When the WB24SCX3 from Fisher & Paykel stops warming or runs hotter than the dial says, the technician asks how often the drawer is used and at what setting. Keep a short note of your typical dinners. In the Miami, New York, Houston, Los Angeles and San Diego metro areas, those notes give a clearer picture of the load. Include WB24SCX3, the symptom and any code in the booking form.
At a glance
| Model | WB24SCX3 |
|---|---|
| Appliance | 24-inch warming drawer |
| Common symptoms | Drawer stops warming, runs hotter than the dial says |
| What you can check | Keep a short note of how often you use the drawer, at what setting and with how heavy a load, and write down any code shown. |
| When to call a technician | Plan a visit if the drawer still will not warm or keeps running hotter than the setting, as the element or temperature sensor may need replacing. |
WB24SCX3 is a Fisher & Paykel 24″ warming drawer from the Series 9 Contemporary line. The model number is printed on the rating label, usually on the frame around the door opening, visible with the door open; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Dimensions | Width is 23 7/16 inches. |
|---|---|
| Capacity | Holds six standard place settings. |
| Features | Six functions include Rapid Proof, Dehydrate and Slow Cook. The drawer opens with a push. Delayed start is available. Temperature adjustment spans 86°F to 212°F. |
| Controls | The drawer uses touch-button controls. |
| Finish | Brushed Silver Glass finish. |
What sets the WB24SCX3 apart
Six functions, including Rapid Proof, Dehydrate and Slow Cook, go beyond simple warming on this drawer. Temperature adjusts from 86 to 212 F, which covers both gentle holds and low-temperature cooking. A push-to-open drawer keeps the front clean, and the brushed silver glass finish matches Contemporary cabinetry. Holding six place settings, it suits a family dinner.
Service notes for the WB24SCX3
Temperature off from the setting usually points to a sensor drifting or a heating element that has lost output, and a technician checks those before the control board. An error code on the control panel often comes from the touch-button board or a loose connector behind the fascia. A drawer that heats slowly can be a relay fault, which the owner can rule out by checking the outlet. Fan, light or display faults are separate and should be noted by which one fails. The owner can record the displayed code, the function in use and the target temperature.
Questions about the WB24SCX3
Where do I find the WB24SCX3 model number?
Check the rating label on the frame around the door opening, visible with the door open. Use the full number, including any letters at the end.
Do you repair the Fisher & Paykel WB24SCX3 on site?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
What should I note before the visit?
Note the mode used (bake, convection, steam, self-clean) and any code on the display.
Common issues for this model
- Drawer not warming or too hot
- Temperature off from the setting
- Error code on the control panel
Recommended repair service
Warming Drawer Repair
Warming drawer not holding temperature or refusing to heat? We diagnose Fisher & Paykel warming drawers.
Troubleshooting resources
Note the mode used (bake, convection, steam, self-clean) and any code on the display.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.