Skip to content
Same-day and next-day appointments in most areas.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Fisher & Paykel.
(844) 659-2290
Error Code

Fisher & Paykel Dryer (Later Generation) — Err3 / E3

Err3 / E3 can share a label across Fisher & Paykel generations. For your Dryer (Dryer — later-generation fault codes), use this page as orientation, then match the reading to your manual or Product Help entry.

Schedule code diagnosis (844) 659-2290

Reviewed by Ethan Cole · Last reviewed August 10, 2026

Ethan Cole Written by Ethan Cole Appliance Repair Content Specialist Published August 10, 2026 Updated August 11, 2026 Technically reviewed August 10, 2026

Content status: Verified

Error code Err3 / E3
Appliance Dryer
Affected model series Dryer (later generation) — confirm the rating-plate model before acting
Quick answer

Err3 / E3 · Dryer — cautious homeowner guidance for this display reading (verify for your serial).

Model compatibility: Fisher & Paykel reuses codes across series and model years, so Err3 / E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

This page provides general guidance while Err3 / E3 is matched to Fisher & Paykel docs for the Dryer — later-generation fault codes platform. Confirm the label on your rating plate before relying on any interpretation.

Signs

Symptoms you may notice

  • The dryer display shows Err3 / E3 during or after a drying cycle.
  • The cycle may pause, stop early, or fail to start while Err3 / E3 is shown.
  • Drying performance may be reduced, or the drum/heater may stop, while the fault is active.
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Check that the door is fully closed.
  • Clean the lint filter and check that the exhaust vent/ducting is not blocked or crushed.
  • Confirm the load is not overloaded.
  • Switch the dryer off at the wall, wait about 60 seconds, then switch back on and retry once.
  • Record the full model and serial number from the rating plate.

Important safety warning. Do not open internal panels, remove covers, or access wiring, the heater, or the motor. Do not bypass the door safety switch. If your model is gas-heated and you ever smell gas, stop immediately, leave the area, and contact your gas provider and a qualified technician. If you notice smoke, sparks, or a burning smell, switch off power at the wall and call a professional immediately.

Get help

When to call a technician

Err3 / E3 on a Fisher & Paykel Dryer is best confirmed against your manuals, then assessed by an independent tech if it repeats. Fisher & Paykel Appliance Repair can help with that next step.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

FAQ

Frequently asked questions

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Ave, Suite 400, Miami, FL 33131
Phone (844) 659-2290
Email service@example.com
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

No obligation. We confirm the appointment before any visit or charge.

Call Book diagnosis