Skip to content
Same-day and next-day appointments in most areas.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Fisher & Paykel.
(844) 659-2290
Error Code

Fisher & Paykel Dryer 29

29 on a Fisher & Paykel Dryer is a display reading homeowners often search when a cycle stalls or an alarm sounds. This page covers how it typically presents, safe checks, and when to bring in an independent technician — always confirm against docs for the SmartLoad dryer — legacy fault codes line.

Schedule code diagnosis (844) 659-2290

Reviewed by Ethan Cole · Last reviewed August 10, 2026

Ethan Cole Written by Ethan Cole Appliance Repair Content Specialist Published August 10, 2026 Updated August 11, 2026 Technically reviewed August 10, 2026

Content status: Verified

Error code 29
Appliance Dryer
Affected model series SmartLoad dryer — confirm the rating-plate model before acting
Quick answer

29 guide for Fisher & Paykel Dryer: symptoms, checks, and booking an independent diagnosis.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 29 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Fisher & Paykel may reuse display labels across generations. For 29 on SmartLoad dryer — legacy fault codes, compare the on-screen text with your model’s error table.

Signs

Symptoms you may notice

  • The dryer display shows 29 during or after a drying cycle.
  • The cycle may pause, stop early, or fail to start while 29 is shown.
  • Drying performance may be reduced, or the drum/heater may stop, while the fault is active.
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Check that the door is fully closed.
  • Clean the lint filter and check that the exhaust vent/ducting is not blocked or crushed.
  • Confirm the load is not overloaded.
  • Switch the dryer off at the wall, wait about 60 seconds, then switch back on and retry once.
  • Record the full model and serial number from the rating plate.

Important safety warning. Do not open internal panels, remove covers, or access wiring, the heater, or the motor. Do not bypass the door safety switch. If your model is gas-heated and you ever smell gas, stop immediately, leave the area, and contact your gas provider and a qualified technician. If you notice smoke, sparks, or a burning smell, switch off power at the wall and call a professional immediately.

Get help

When to call a technician

If 29 returns after the safe checks, pause further DIY and book an independent diagnosis with Fisher & Paykel Appliance Repair — bring the model/serial and a photo of the display.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

FAQ

Frequently asked questions

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Ave, Suite 400, Miami, FL 33131
Phone (844) 659-2290
Email service@example.com
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

No obligation. We confirm the appointment before any visit or charge.

Call Book diagnosis