Fisher & Paykel Dishwasher A60
This guide explains A60 in plain language for Fisher & Paykel Dishwasher appliances (Drop Door dishwasher — fault codes). It is independent repair guidance — not official manufacturer service instructions.
Content status: Verified
A60 · Dishwasher — cautious homeowner guidance for this display reading (verify for your serial).
Model compatibility: Fisher & Paykel reuses codes across series and model years, so A60 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Summary for A60 (Drop Door dishwasher — fault codes). Independent repair notes only — not a substitute for the current Product Help article or tech sheet for your serial.
Symptoms you may notice
- The dishwasher display shows A60 during or after a wash cycle.
- The cycle may pause, stop early, or fail to complete while A60 is shown.
- The door may be difficult to open or close while the fault is active.
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check that the door is fully closed and latched before restarting.
- Confirm the water supply tap is fully open and not kinked or restricted.
- Check that the drain hose is not kinked and the drain path is clear.
- Switch the dishwasher off at the wall, wait about 60 seconds, then switch back on and retry once.
- Record the full model and serial number from the rating plate.
Important safety warning. Do not open internal panels, remove covers, or access wiring or the control board. Do not bypass the door safety interlock. If you notice water pooling near electrical parts, a burning smell, or sparks, switch off power at the wall and call a professional immediately.
When to call a technician
If you are unsure about A60 at any point, step away from internal panels and schedule Fisher & Paykel Appliance Repair. Sealed, gas, and high-voltage work stays with qualified technicians.
Frequently asked questions
Try only the safe checks listed here and a single wall-power restart. If A60 returns, stop DIY — the underlying condition needs a proper diagnosis.
Not reliably. Fisher & Paykel reuses labels across platforms and years. Always match the reading to your exact model documentation.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.