Skip to content
Same-day and next-day appointments in most areas.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Fisher & Paykel.
(844) 659-2290
Error Code

Fisher & Paykel Dishwasher FC0

When FC0 appears on a Fisher & Paykel Dishwasher, the safest path is: observe, do only the listed checks, then stop if the code returns. Platform context: Drop Door dishwasher — fault codes.

Schedule code diagnosis (844) 659-2290

Reviewed by Ethan Cole · Last reviewed August 10, 2026

Ethan Cole Written by Ethan Cole Appliance Repair Content Specialist Published August 10, 2026 Updated August 11, 2026 Technically reviewed August 10, 2026

Content status: Verified

Error code FC0
Appliance Dishwasher
Affected model series Drop Door dishwasher — confirm the rating-plate model before acting
Quick answer

FC0 on a Fisher & Paykel Dishwasher — plain-language overview; confirm against your model docs.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so FC0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Confirm the exact meaning for this Fisher & Paykel platform (Drop Door dishwasher — fault codes). Treat FC0 and verify against Product Help or the model manual for your specific unit.

Signs

Symptoms you may notice

  • The dishwasher display shows FC0 during or after a wash cycle.
  • The cycle may pause, stop early, or fail to complete while FC0 is shown.
  • The door may be difficult to open or close while the fault is active.
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Check that the door is fully closed and latched before restarting.
  • Confirm the water supply tap is fully open and not kinked or restricted.
  • Check that the drain hose is not kinked and the drain path is clear.
  • Switch the dishwasher off at the wall, wait about 60 seconds, then switch back on and retry once.
  • Record the full model and serial number from the rating plate.

Important safety warning. Do not open internal panels, remove covers, or access wiring or the control board. Do not bypass the door safety interlock. If you notice water pooling near electrical parts, a burning smell, or sparks, switch off power at the wall and call a professional immediately.

Get help

When to call a technician

FC0 on a Fisher & Paykel Dishwasher is best confirmed against your manuals, then assessed by an independent tech if it repeats. Fisher & Paykel Appliance Repair can help with that next step.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

FAQ

Frequently asked questions

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Ave, Suite 400, Miami, FL 33131
Phone (844) 659-2290
Email service@example.com
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

No obligation. We confirm the appointment before any visit or charge.

Call Book diagnosis