Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Oven Code A2: Self Clean Door Lock Fault

Error code A2
Appliance Oven
Quick answer

A2 means a wall oven door would not lock at the start of Self Clean.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so A2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Door lock error: after Self Clean is started, the door cannot be locked.

The oven halts a Self Clean cycle and shows A2. In Fisher & Paykel’s wording this is a door lock error: the cycle was started, but the door could not be locked.

At a glance

Code A2
What it means Door lock error: after Self Clean is started, the door cannot be locked.
What you can check Close the door fully and make sure no tray handle or dish towel holds it ajar. Then turn the oven's power off and on, set the clock, and run Self Clean a second time.
When to call a technician If A2 shows again after that repeat, a technician is needed. The cycle runs very hot, so do not force the door; a lock repair means opening the oven, which is not an owner job.

The help page’s advice

Cycle the power off and on, set the clock, then run Self Clean a second time. A repeat of the fault means calling a service technician, according to the page, which was written for wall ovens OB60C, OB60SL and OB76V3.

Things to rule out

Inspect the door. Is it closed completely, or could a tray handle or dish towel be holding it ajar? The source names none of these as causes; they are ordinary checks, not the manufacturer’s explanation.

Why a technician comes next

Cleaning runs very hot, and it is the lock that keeps the door shut. An unlockable door is thus a safety issue, and a lock repair requires opening the oven, which owners should not attempt. Never force the door.

A2 against its relatives

  • A3 is the reverse problem, a door that stays locked when the cleaning is done.
  • A1 is an overheated oven.
  • F217 is the door lock error used on combi ovens.

Oven door lock repair, metro areas

For Fisher & Paykel customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas, (844) 659-2290 is the number if A2 survives the reset. Tell us the oven model plus what you have tried. See the oven repair page as well.

Source: Fisher & Paykel Product Help, Wall Oven OB76V3, OB60SL and OB60C fault codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

  • Fisher & Paykel Product Help: Wall Oven - OB76V3, OB60SL and OB60C Models fault codes (Wayback 2023-02-20)

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis