Fisher & Paykel Oven Code F101: Combi Oven Power Board Fault
F101 is shown as a power board fault for the convection and microwave combi oven.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F101 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fisher & Paykel lists F101 as a power board fault for its convection and microwave combi oven.
The convection plus microwave combi oven’s fault table lists F101 as “Power board” and says nothing more about it. Fisher & Paykel gives a quick restart and a firm instruction for the case where that does not work.
At a glance
| Code | F101 |
|---|---|
| What it means | F101 is a power board fault on the convection and microwave combi oven. |
| What you can check | Wait until the oven is entirely cool and the cooling fan has quit, switch off at the power supply, and after a full minute switch on again. Leave the panels closed. |
| When to call a technician | If F101 comes back after the restart, book a service call. The power board is an electronic component, and a combi oven carries a microwave section as well. |
Restart in four moves
- Wait until the oven is entirely cool and the cooling fan has quit.
- Switch off at the power supply.
- After a full minute, switch on again.
- Check the display; the code being gone means you can carry on as usual.
Since the fan exists to bring the temperature down, the sequence matters: first cool, then cut the power.
If F101 comes back
Fisher & Paykel says to book a service call. Inside the appliance sits the power board, an electronic component dealing with the oven’s supply of power, and a combi oven carries a microwave section as well. Leave the panels closed.
Same number, different oven
OB60 wall ovens have their own F1 series, which the manufacturer calls a clock board fault. Establish what kind of oven you own before reading across; the F101 entry here belongs to the convection plus microwave model. Wall oven owners should turn to F1XX.
Other board faults on the combi oven
- F211 and its relatives are likewise power board errors.
- F102 and its relatives are board communication errors.
Combi oven repair, metro areas
Our Fisher & Paykel combi oven work covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290, give F101 and the model number, and mention the one-minute restart you tried. See the oven repair page too.
Source: Fisher & Paykel Support, Combi oven: Convection + Microwave fault codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.