Fisher & Paykel Oven F211, F212, F218, F219, F220, F221, F224 Codes
A group of seven combi oven codes that the manufacturer labels as power board errors.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F211 / F212 / F218 / F219 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F211, F212, F218, F219, F220, F221 and F224 are all listed as power board error on the Fisher & Paykel combi oven.
One meaning for seven numbers
Look up F211, F212, F218, F219, F220, F221 or F224 and the answer is identical for all seven: power board error. The board in question handles supply and switching of electricity for parts of the oven that do the work. Narrowing it to one function is something the manufacturer does not do.
At a glance
| Code | F211 / F212 / F218 / F219 … |
|---|---|
| What it means | F211, F212, F218, F219, F220, F221 and F224 are all power board errors on the combi oven. |
| What you can check | Let the oven go fully cold and the fan run down to a stop, disconnect it at the supply, leave it 1 minute and power it back up. Never cut power while the fan runs. |
| When to call a technician | If the code repeats, book a service call. Tell whoever helps you exactly which of the seven codes showed on the display. |
Reset steps
- Let the oven go fully cold and the fan run down to a stop.
- Disconnect it at the supply.
- Leave it 1 minute.
- Power it back up.
A repeat of the code means, per the manufacturer, booking a service call.
Why not reset a hot oven
A running fan means the oven is still cooling off, and removing power stops that. Another model’s wall oven guide from the manufacturer cautions that shutting off an overheated oven can harm both appliance and cabinetry. The ovens differ, the principle carries over.
Not the same as the F101 entry
F101 is a power board fault as well, though the table lists it by itself, whereas these seven appear together as a longer range. Since no number is called worse than another, tell whoever helps you which one showed.
More codes in the table
- F101: the one-code power board listing.
- F213, F214 and F229: cavity sensor errors.
- F215: a sensor or power issue.
Oven repair in Miami, New York, Houston, Los Angeles and San Diego
In the Miami, New York, Houston, Los Angeles and San Diego metro areas, power board codes on a combi oven can be booked by phone on (844) 659-2290. Have the exact code and model number ready. Details are on the oven repair page.
Source: Fisher & Paykel Support, Combi oven: Convection + Microwave fault codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.