Fisher & Paykel Oven F213, F214 and F229 Codes: Cavity Sensor
F213, F214 and F229 are cavity sensor errors on the combi oven; there are no owner checks beyond a restart.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F213 / F214 / F229 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fisher & Paykel lists F213, F214 and F229 as cavity sensor errors on its combi oven.
Meaning of the three codes
Fisher & Paykel labels F213, F214 and F229 cavity sensor error on the combi oven. Cavity is the chamber where food goes. A sensor inside informs the control of the chamber’s temperature; when it fails to, the oven has no way of judging its own heat.
At a glance
| Code | F213 / F214 / F229 |
|---|---|
| What it means | F213, F214 and F229 are cavity sensor errors on the combi oven. |
| What you can check | Wait for full cool-down and for the fan to stop, cut power at the supply for a minute, then restore it. Do not open the oven to inspect the sensor. |
| When to call a technician | If a sensor error still shows after the restart, arrange a service. Share the code you saw and the result of the power reset. |
Why a sensor reading matters
Holding temperature depends on measuring heat and matching it to your chosen setting. Without a dependable measurement, regulation cannot work. The manual draws no line between the three numbers, so just quote the one you saw.
What to do, per the table
- Before anything else, wait for full cool-down and for the fan to stop.
- Cut power at the supply for a minute, then restore it.
- Sensor error still on the display? Arrange a service.
There are no sensor tests and no instruction to check wiring in the table. The owner stops at the restart and does not open the oven to inspect the sensor.
Sensor entries elsewhere in the list
| Code | Listed as |
|---|---|
| F215 | Sensor or power issue |
| F216 | Sensor or thermistor error |
| F412, F413, F415, F416 | NTC error |
Each is its own family, so apply only the description of the code in front of you.
Fisher & Paykel oven repair, five metro areas
Booking for Miami, New York, Houston, Los Angeles and San Diego is on (844) 659-2290. Share the code, the model number and the result of the power reset. The oven repair page lists what we cover.
Source: Fisher & Paykel Support, Combi oven: Convection + Microwave fault codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.