Fisher & Paykel Oven F216 Code: Sensor or Thermistor Error
F216 on the combi oven is listed as a sensor or thermistor error. Reset once cool; book service if it persists.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F216 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F216 is listed by Fisher & Paykel as a sensor or thermistor error on its combi oven.
What F216 means
The combi oven (convection plus microwave) table lists F216 as a sensor or thermistor error. A thermistor works as a temperature probe: its resistance changes as it heats or cools, and the oven’s board reads this to know the cavity’s temperature.
At a glance
| Code | F216 |
|---|---|
| What it means | F216 is a sensor or thermistor error on the convection and microwave combi oven. |
| What you can check | Confirm the oven is completely cool and the cooling fan has stopped, turn it off at the power supply, wait one minute and switch back on. Do not shorten the wait. |
| When to call a technician | Book a service call when F216 shows again, since the restart is the only owner step. Give the model details and say what you did with the power. |
No further detail is given. The manufacturer neither says which probe nor lists causes.
Trying the reset
- Confirm the oven is completely cool.
- Confirm the cooling fan has stopped.
- Turn the oven off at the power supply; wait one minute.
- Switch back on and see if F216 reappears.
The manufacturer’s note says some faults can be cleared this way, but only under those cool, fan-stopped conditions, so do not shorten the wait or switch off while the oven is warm.
If it stays
Book a service call when F216 shows again. The restart is the only owner step the table offers.
Compare with
- F215, a sensor or power issue listed just before it.
- F412, F413, F415 and F416, shown as NTC errors (NTC being a thermistor type).
Fisher & Paykel oven repair in our metro areas
People in the Miami, New York, Houston, Los Angeles and San Diego areas can reach us at (844) 659-2290. Tell us the model details, the code F216 and what you did with the power. See the oven repair page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.