Fisher & Paykel Series 11 Contemporary OB30SCPSUDX3 Wall Oven
30" wall oven (steam assist) from the Series 11 Contemporary line — model notes, common issues and related Fisher & Paykel oven service.
Model overview
A steam assist wall oven such as the OB30SCPSUDX3 from Fisher & Paykel shares its basic cavity layout with conventional models, but the steam hardware and controls can differ between versions, so the exact number matters. Copy it from the rating label, which sits on the frame around the door opening, and include every letter. A water reservoir warning, a slow preheat or a temperature that drifts can each point to a different part, and the model number tells the technician which ones fit. Note the steam setting you used and whether the water tank was full. In the Miami, New York, Houston, Los Angeles and San Diego metro areas, a complete model number on the booking form keeps the visit focused. Include OB30SCPSUDX3 along with the symptom and any code displayed.
At a glance
| Model | OB30SCPSUDX3 |
|---|---|
| Appliance | 30-inch steam assist wall oven |
| Common symptoms | Water reservoir warning, slow preheat, drifting temperature |
| What you can check | Copy the full model number from the rating label around the door opening. Note the steam setting you used, whether the water tank was full and any code shown. |
| When to call a technician | Have a technician look at it when the reservoir warning, slow preheat or drifting temperature returns; the right parts depend on the exact version. |
OB30SCPSUDX3 is a Fisher & Paykel 30″ wall oven (steam assist) from the Series 11 Contemporary line. The model number is printed on the rating label, usually on the frame around the door opening, visible with the door open; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Capacity | Total capacity: 4.9 cu ft. |
|---|---|
| Features | Three automatically controlled steam levels. Eight shelf positions. Three full-extension sliding shelves supplied. Wired temperature sensor supplied. |
| Controls | 6.8-inch touchscreen. |
| Care | Pyrolytic self-cleaning. |
| Finish | Brushed silver finish. |
What sets the OB30SCPSUDX3 apart
Three automatically controlled steam levels make this oven a steam-assist unit rather than a standard single oven, so the steam path is part of the service picture. The 6.8-inch touchscreen is the control point, and three full-extension shelves are supplied for loaded trays. Pyrolytic self-cleaning heats the cavity to a high temperature to burn off residue, which is why the door locks during the cycle.
Service notes for the OB30SCPSUDX3
Steam assist that does not start or comes out weak points to the water supply, the steam generator and the level sensor, so a technician checks the water feed before the generator. An oven that heats slowly or misses its set point needs the wired temperature sensor and element checked next. Error codes on the touchscreen usually come from the control board or a sensor connection, so the code on the booking form matters. Before the visit, the owner can confirm the water tank is seated, check that the sensor plug is fully in, and wipe the cavity before any self-clean. Cut power at the breaker before removing any panel or the steam tank.
Questions about the OB30SCPSUDX3
Where do I find the OB30SCPSUDX3 model number?
Check the rating label on the frame around the door opening, visible with the door open. Use the full number, including any letters at the end.
Do you repair the Fisher & Paykel OB30SCPSUDX3 on site?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
What should I note before the visit?
Note the mode used (bake, convection, steam, self-clean) and any code on the display.
Common issues for this model
- Steam or water reservoir warning
- Error code on the control panel
- Oven not heating or slow to preheat
- Temperature off from the setting
Related error codes
Fisher & Paykel Oven F443: Inverter Error
F443 is an inverter error on the combi oven; no reset is listed, so book service.
Fisher & Paykel Oven F1XX Code: Clock Board Fault
F1XX groups the clock board faults of OB60 wall ovens; the manufacturer gives only a short description.
Fisher & Paykel Oven F225 Code: Cooling Fan Stall Error
F225 is a stalled cooling fan on the combi oven. Reset once cool; a second F225 means booking service.
Fisher & Paykel Oven F213, F214 and F229 Codes: Cavity Sensor
F213, F214 and F229 are cavity sensor errors on the combi oven; there are no owner checks beyond a restart.
Recommended repair service
Oven Repair
Oven not heating, baking unevenly, or showing an error? We diagnose Fisher & Paykel ovens with a safety-first approach.
Troubleshooting resources
Note the mode used (bake, convection, steam, self-clean) and any code on the display.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.