Fisher & Paykel RHV3-484-N Four Burner and Four Zone Hybrid Range
Gas and induction hybrid range; owners most often report ovens that drift off temperature or a stiff touchscreen.
Model overview
The RHV3-484-N is a hybrid range from Fisher & Paykel that combines four natural-gas burners with four induction zones on one cooktop. The induction zones bridge into two SmartZones for large pans, and the gas burners reach 23,500 BTU at maximum output. Two convection ovens share 6.9 cu. ft. of combined space, and a tilting touchscreen runs the guided cooking. Across the metro areas we cover, the most common complaints are ovens that drift off temperature and convection fans that stop. For the booking form, describe which side misbehaves, paste the complete number from the rating plate, and list any code on the touchscreen.
At a glance
| Model | RHV3-484-N |
|---|---|
| Appliance | 48-inch Four Burner and Four Zone Hybrid Range, Natural Gas |
| Common symptoms | oven not reaching or holding temperature; convection fan or oven light not working; control panel or knob problems; uneven baking or broiling |
| What you can check | Note whether the problem is on the cooktop, the oven, or both, and the fuel type. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Width is 47 7/8 inches. |
|---|---|
| Capacity | Combined oven capacity is 6.9 cu. ft. |
| Power | Maximum gas burner output is 23,500 BTU. |
| Features | Four gas burners. Four induction zones. Induction zones bridge into two SmartZones. |
| Controls | Tilting touchscreen interface. |
| Care | Pyrolytic self-cleaning. |
What sets the RHV3-484-N apart
The hybrid layout is what separates this model: open-flame burners and induction zones share one counter, so a cook can switch styles without a second appliance. Two convection ovens let baking and roasting run at different temperatures. Day to day, one oven can run hot while the other holds steady, which is worth checking before anyone calls it a fault.
Service notes for the RHV3-484-N
A technician starts with the oven temperature sensor and the convection fan, because a fan that stalls or a sensor that reads low explains most drifting temperatures and uneven bakes on a dual-oven range. The touchscreen board is checked next when the controls lag or ignore touches. Before the visit, the owner can preheat each oven empty to one set point and read it with a separate oven thermometer, then note the numbers. Turn the range off and let it cool before reaching behind any panel. If the cooktop smells of gas or a burner keeps clicking without lighting, leave the room and call the gas utility first.
The model number is printed on the rating label, usually on the frame behind the storage or warming drawer, or around the oven door opening; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
What is the maximum gas burner output on the RHV3-484-N?
The maximum gas burner output is 23,500 BTU. A burner that will not reach full flame is worth noting on the booking form.
Does the RHV3-484-N have induction cooking as well as gas?
Yes. Four induction zones sit next to the four gas burners, and the zones join into two SmartZones for larger cookware.
Where do I find the full RHV3-484-N model number?
Check the rating label on the frame behind the storage or warming drawer, or around the oven door opening. Copy every letter and digit, including the ones at the end.
Do you repair the Fisher & Paykel RHV3-484-N at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Oven not reaching or holding temperature
- Convection fan or oven light not working
- Control panel or knob problems
- Uneven baking or broiling
Related error codes
Fisher & Paykel Range E8: Oven Fan Error
E8 on a freestanding range is listed as an oven fan error; book a service repair.
Fisher & Paykel Range F213 Error Code and Six Related Sensor Codes
Sensor errors on a freestanding range: F213, F214, F215, F216, EA, E2 and E36. F215 and F216 are double-listed with board errors.
Fisher & Paykel Range E3 Code: Cookware Not Compatible
On an induction range E3 means the pan is not compatible. A magnet on the base tells you.
Fisher & Paykel Range E40 / U400: Power Supply Error
E40 and U400 are one power supply error on a Fisher & Paykel range. Book service; no reset exists.
Recommended repair service
Range Repair
Burners not igniting, oven heat uneven, or an error on the display? We diagnose Fisher & Paykel ranges safely.
Troubleshooting resources
Note whether the problem is on the cooktop, the oven, or both, and the fuel type.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.