Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Range F213 Error Code and Six Related Sensor Codes

Error code F213 / F214 / F215 / F216 …
Appliance Range
Quick answer

Sensor errors on a freestanding range: F213, F214, F215, F216, EA, E2 and E36. F215 and F216 are double-listed with board errors.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so F213 / F214 / F215 / F216 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Fisher & Paykel lists F213, F214, F215, F216, EA, E2 and E36 on freestanding cookers under sensor errors.

What the guide calls these codes

All seven codes are described as a sensor error: F213, F214, F215, F216, EA, E2 and E36. Which sensor is meant is not stated. On a range oven, a sensor is typically a temperature probe.

At a glance

Code F213 / F214 / F215 / F216 …
What it means F213, F214, F215, F216, EA, E2 and E36 all mean a sensor error on the range.
What you can check Start only once the fans have stopped and the oven is completely cold. Turn the range off at the power supply, count 30 seconds, then turn it back on and read the display.
When to call a technician If the code is back after the reset, a service repair is needed, since the probe and its wiring require a technician's tools. Give the exact code.

Two lists, two sets of advice

  • F215 and F216 are on the sensor list and on the electronic board or software list.
  • The board and software list has a reset after the oven cools. The sensor list has no named step, so the generic line applies: book a service repair.
  • The guide does not settle which list wins. The reset should not be expected to cure a sensor fault.

Reset steps

Only start once the cooling fans have stopped and the oven is completely cool. Turn the range off at the power supply, count 30 seconds, and turn it back on. Removing power from a hot oven can damage the oven and the cabinetry around it, according to the guide.

After the reset

If a sensor code is back, the guide’s answer is a service repair. The probe and its wiring need a technician’s tools and are not an owner job.

See also

  • F101 group: the board and software errors, where F215 and F216 are also listed.
  • F225: a cooling fan error listed in the same guide.

Fisher & Paykel range service in Miami, New York, Houston, Los Angeles and San Diego

We handle Fisher & Paykel range service calls across the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 with the exact code, the model number and whether you tried the power reset. More detail is on the range repair page.

Source: Fisher & Paykel Support, F, A, E or U displaying on Freestanding Cooker

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis