Fisher & Paykel Washer E7:02
This guide explains E7:02 in plain language for Fisher & Paykel Washer appliances (Front-load washer — legacy fault codes). It is independent repair guidance — not official manufacturer service instructions.
Content status: Verified
What E7:02 often looks like on Fisher & Paykel Washer appliances, plus safe next steps.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so E7:02 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Official wording for E7:02 on the Front-load washer — legacy fault codes line may vary by model. Use the safe checks below and refer to your model manual for the exact meaning.
Symptoms you may notice
- The washer display shows E7:02 during or after a wash cycle.
- The cycle may pause, stop early, or fail to start while E7:02 is shown.
- The machine may not fill, agitate, spin, or drain normally while the fault is active.
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check that the lid or door is fully closed (and locked, on models with a lid/door lock).
- Confirm the water supply taps are fully open and hoses are not kinked or restricted.
- Check that the drain hose is not kinked and the drain/standpipe is clear.
- Confirm the load is not overloaded or unbalanced.
- Switch the washer off at the wall, wait about 60 seconds, then switch back on and retry once.
- Record the full model and serial number from the rating plate.
Important safety warning. Do not open internal panels, remove covers, or access wiring, the motor, or the control board. Do not bypass the lid/door safety switch. If you notice water pooling near electrical parts, a burning smell, or sparks, switch off power at the wall and call a professional immediately.
When to call a technician
Still seeing E7:02 after a single power-cycle and the checks above? Book Fisher & Paykel Appliance Repair with the code noted — we diagnose on site and wait for your approval before any repair.
Frequently asked questions
If there is water near electrics, smoke, a burning smell, or a gas odor, switch off and call a professional. Otherwise pause cycles, do the safe checks once, and book help if E7:02 persists.
No. This is independent repair guidance from Fisher & Paykel Appliance Repair. For official wording use Product Help and your model’s docs.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.