Fisher & Paykel Washer 104 Code: Display and Motor Controller Communications
Washer code 104 reports a communications error between the Display and Motor Controller on Phase 2 to 6 Fisher & Paykel machines; see 106.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 104 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Display to Motor Controller communications error on Phases 2 to 6; the manual's only instruction is to see fault code 106.
When 104 shows, a Smart Drive washer from Fisher & Paykel has lost proper communication between its Display module and its Motor Controller. It applies to Phases 2 to 6, and the manual’s whole entry is: see fault code 106.
At a glance
| Code | 104 |
|---|---|
| What it means | Display to Motor Controller communications error on Phases 2 to 6; the manual's only instruction is to see fault code 106. |
| What you can check | Note the code and the model name on the machine, do not open the console, and cut power at the wall if it keeps stopping. |
| When to call a technician | A technician is the next step, as either the display module or the controller module may need replacing, display first. Describe when the fault shows up and give the model name. |
Why 106 matters here
As 104 has no steps of its own, the 106 entry applies. The first suspect there is the Display module, to be replaced. After that comes the Motor Controller, again a replacement, and a cured fault means the old Display module returns to its place. For this code the manual offers neither a power cycle nor cleaning; the work is a technician’s.
The exchange runs between two modules, so either one can be at fault, and the procedure covers both in order.
Plain description of the boards
- Display module: accepts the buttons you press and lights the indicators.
- Motor Controller module: controls the motor and gets its water level sensor reading.
These are loose descriptions. When the pair cannot talk properly, the report comes from the Display module.
What you can do
- Take note of the code and the model name on the machine.
- Do not open the console.
- If the machine keeps stopping, cut power at the wall.
See also
- 106: the entry whose procedure 104 refers to
- 105: a time-out on the same link
- 81 to 95: earlier-phase versions of the same error
Washer repair in the metro areas we serve
For the Miami, New York, Houston, Los Angeles and San Diego metro areas, ring (844) 659-2290. Describe when the fault shows up and give the model name.
Source: Fisher & Paykel Phase 6 Series 11 (GWL11) service manual 517766, Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.