Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Code 11: Negative Pressure Fault

Error code 11
Appliance Washer
Quick answer

Error 11 on a Fisher & Paykel washer reports negative pressure from the water level sensor. The manual begins with the pressure tube and ends with a Motor Controller replacement.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 11 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Pressure sensor fault: negative pressure detected by the Motor Controller during water level measurement, on Phases 1 to 6.

Water level in a Fisher & Paykel Smart Drive washer is judged by a pressure sensor. Fault 11 means the Motor Controller micro picked up a negative pressure from it, which is not a believable reading for a tub of water. It applies to Phases 1 to 6.

At a glance

Code 11
What it means Pressure sensor fault: negative pressure detected by the Motor Controller during water level measurement, on Phases 1 to 6.
What you can check Make sure the tub is fully pumped out and switch the washer off at the wall. The tube and sensor work is inside the machine and is not an owner task.
When to call a technician Call a technician if code 11 shows, since steps include reconnecting the pressure tube and replacing a module. Say whether the washer was just serviced or moved.

The suggested cause

The manual says that the fault may have come from reconnecting the pressure tube to the sensor with the bowl partly filled. That makes the pressure tube, the small hose bringing water-level pressure to the sensor, the primary source.

Step list from the manual

Step Action
1 Confirm the bowl is fully pumped out
2 Disconnect the pressure tube from the sensor, clear the water from it, reconnect it
3 Fault still present: replace the Motor Controller module (Display module on Phase 1)

A technician is who these steps are written for, since the work is inside the machine. Step 3 replaces a part. Owners should switch the washer off at the wall.

Why the first step is first

The manual connects this code to a tube being reconnected while water is in the bowl, so the bowl has to be empty before anything else.

Related pressure entries

  • 38: water level seen as empty while agitating
  • 39: the tube blocked, kinked or fallen off
  • 2: failure when reading the pressure sensor

Washer service in the metro areas we cover

To book in the Miami, New York, Houston, Los Angeles or San Diego metro areas, phone (844) 659-2290. Mention whether the washer was just serviced or moved when the code first appeared.

Source: Fisher & Paykel Phase 6 Series 11 (GWL11) service manual 517766, Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis