Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Error 39: Pressure Tube

Error code 39
Appliance Washer
Quick answer

Error 39 points first to the pressure tube being blocked with water or dirt, kinked or off.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 39 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The pressure tube has probably been blocked, kinked or detached, or the pressure sensor is faulty.

What the manual says

The probable culprit named for 39 is the pressure tube. Smartdrive Phases 1 to 6 share this mechanical fault, in which the tube is clogged, bent or entirely detached. If the tube is in good condition, a defective pressure sensor is the alternative.

At a glance

Code 39
What it means The pressure tube has probably been blocked, kinked or detached, or the pressure sensor is faulty.
What you can check Nothing here can be done outside the cabinet and no reset exists. If you do look inside, unplug the washer first.
When to call a technician Have a technician inspect the pressure tube and, if it is sound, replace the module. Give the code and model.

Approach in two stages

  • Mechanical: see that the pressure tube is complete, not blocked by water or dirt, and straight.
  • Controller module: swap it in once the tube proves sound. Phase 1 substitutes the Display Module.

The role of the tube

Pressure tells a Smartdrive how deep the water is, and the tube is what delivers it to the sensor.

Within reach

Nothing here can be done outside the cabinet. The washer has to be opened to reach the tube, so unplug it first, and if working inside appliances is unfamiliar, a technician should do the looking. No reset is listed for this code.

Versus code 38

An empty level in agitate is what 38 logs; 39 is the broader tube condition. In each the pressure tube is the first thing looked at.

  • Code 38 is the empty reading while agitating.
  • Code 40 is a check of the basket, where the pressure tube comes up again as a second area.

Fisher & Paykel washer repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas

Call (844) 659-2290 with your code and model.

Source: Fisher & Paykel Smartdrive washer service manual 517766 (March 2003), section 19, Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis