Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Code 107: Unexpected Controller Reset

Error code 107
Appliance Washer
Quick answer

Washer fault 107 is a Motor Controller reset error. The manual points to a supply disturbance or a microprocessor failure and replaces the Motor Controller.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 107 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Reset error: the Display module detected the Motor Controller module resetting unexpectedly, on Phases 2 to 6.

On Phases 2 to 6, fault 107 says the Motor Controller module restarted itself at the wrong time, and the Display module was the one that saw it happen.

At a glance

Code 107
What it means Reset error: the Display module detected the Motor Controller module resetting unexpectedly, on Phases 2 to 6.
What you can check Leave the machine closed, since a supply disturbance is an electrical matter. Unplug the washer if it acts oddly and note what it does when the fault appears.
When to call a technician A technician is needed, because the controller module either lost steady power or its chip failed, and the module is replaced. Give the code, the model and what the washer does.

Causes the manual gives

Cause Meaning
Motor Controller supply disturbance Power reaching that module was cut or unsteady
Microprocessor failure The module’s controlling chip has stopped working

Which of the two occurs more often is not stated, and neither is a way of separating them without testing.

What the entry tells the technician

The primary source is the Motor Controller module and the action is to replace it. That is the full extent of the entry; no secondary or tertiary sources are included.

Why 107 is handled differently

For 104, 105 and 106 the failed element is the exchange of messages and the Display module is replaced first. Here the Display module saw the Motor Controller reset unexpectedly, so only the Motor Controller is listed.

What you can do

  • Leave the machine closed; a supply disturbance is an electrical matter for service.
  • Unplug the washer when it acts oddly and have it looked at.
  • Note that the manual calls the code the last recorded fault, one that must be confirmed.

Related entries

  • 105: time-out between Display and Motor Controller
  • 35: a Phase 1 reset error where the Display sent a false signal

Washer repair in our metro areas

Phone (844) 659-2290 for the Miami, New York, Houston, Los Angeles and San Diego metro areas, and give the code, the washer model and what it does when the fault appears.

Source: Fisher & Paykel Phase 6 Series 11 (GWL11) service manual 517766, Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis