Fisher & Paykel Oven Codes F193, F198: Board Initiation Fault
Combi oven codes F193 and F198 share one listing: board initiation error.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F193 / F198 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fisher & Paykel lists F193 and F198 as board initiation errors on the convection and microwave combi oven.
F193 and F198 appear together in Fisher & Paykel’s combi oven table under one description, board initiation error. The phrase is the manufacturer’s, and the table gives no further explanation.
At a glance
| Code | F193 / F198 |
|---|---|
| What it means | F193 and F198 are board initiation errors on the convection and microwave combi oven. |
| What you can check | Wait for the oven to be completely cool and the fan to switch itself off. Disconnect the power supply, wait a minute and reconnect. Do not open the oven. |
| When to call a technician | If the code remains after the restart, arrange service. The combi oven has a microwave section, so no owner checks apply. Mention F193 or F198 and the model number. |
Questions and answers
Do the two codes mean the same thing?
Description and advice match exactly. The source says nothing on how they differ.
What comes first?
Wait for the oven to be completely cool and for the fan to switch itself off. Disconnect the power supply, wait a minute, and reconnect.
What if the code remains?
Fisher & Paykel says to arrange service.
May I open the oven?
No. A microwave section is built into this combi model, and the manufacturer gives owners no checks.
Reason for the restart
The manufacturer advises a restart, then a service booking whenever the code reappears. Cooling always comes first.
Both codes get one routine in the table: the oven cools and the fan stops, the power stays off for a minute, and the oven is switched on again. If the code is still shown, service is booked. The table names no part other than the board and gives no difference in meaning or remedy between F193 and F198.
Where these codes sit
- F102 and its relatives are communication errors.
- F199 is the configuration variety of board error.
The three kinds are separate entries, so tell a technician about each code on its own.
Combi oven board repair in the metro areas
Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can phone (844) 659-2290; mention F193 or F198 and the model number. See the oven repair page as well.
Source: Fisher & Paykel Support, Combi oven: Convection + Microwave fault codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.