F223 is a RAM error on the combi oven. Reset once cool; if it returns, book service.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F223 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F223 is listed by Fisher & Paykel as a RAM error on the combi oven.
Fisher & Paykel’s combi oven table lists F223 as a “Ram error”. That is the entire entry: no list of causes, no named part. Anything more precise you come across elsewhere is unconfirmed.
At a glance
| Code | F223 |
|---|---|
| What it means | F223 is a RAM error: the oven control board's working memory did not pass a check. |
| What you can check | Wait until the oven is cold and the cooling fan makes no noise, switch off at the power supply, count a full minute and switch on. |
| When to call a technician | If F223 shows again, book a service call. Note whether it came up mid-cycle or at power-up, and whether the screen showed anything else. |
What RAM is
RAM is short-term memory, used by a processor while it works, and an oven’s control board contains some. A RAM error tells you that this working memory did not pass a check. It is not about the food, and it is not about the cavity.
Do this
- Wait until the oven is cold and the cooling fan makes no noise.
- Switch off at the power supply and count a full minute.
- Switch on.
The manufacturer notes that some faults can be rectified by resetting the oven. F223 showing again means the manufacturer wants a service call booked.
Details worth writing down
Note whether F223 came up mid-cycle or at power-up, and whether the screen showed anything else. Either detail helps a technician decide where to begin.
Similar electronics codes
Fisher & Paykel oven repair, metro coverage
Call (844) 659-2290 from the Miami, New York, Houston, Los Angeles or San Diego areas if the combi oven keeps showing F223. See the oven repair page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.