Fisher & Paykel Washer 86
When 86 appears on a Fisher & Paykel Washer, the safest path is: observe, do only the listed checks, then stop if the code returns. Platform context: SmartDrive top-load washer — legacy fault codes.
Content status: Verified
86 on a Fisher & Paykel Washer — plain-language overview; confirm against your model docs.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 86 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
This page provides general guidance while 86 is matched to Fisher & Paykel docs for the SmartDrive top-load washer — legacy fault codes platform. Confirm the label on your rating plate before relying on any interpretation.
Symptoms you may notice
- The washer display shows 86 during or after a wash cycle.
- The cycle may pause, stop early, or fail to start while 86 is shown.
- The machine may not fill, agitate, spin, or drain normally while the fault is active.
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check that the lid or door is fully closed (and locked, on models with a lid/door lock).
- Confirm the water supply taps are fully open and hoses are not kinked or restricted.
- Check that the drain hose is not kinked and the drain/standpipe is clear.
- Confirm the load is not overloaded or unbalanced.
- Switch the washer off at the wall, wait about 60 seconds, then switch back on and retry once.
- Record the full model and serial number from the rating plate.
Important safety warning. Do not open internal panels, remove covers, or access wiring, the motor, or the control board. Do not bypass the lid/door safety switch. If you notice water pooling near electrical parts, a burning smell, or sparks, switch off power at the wall and call a professional immediately.
When to call a technician
Persistent 86 usually needs hands-on testing. Contact Fisher & Paykel Appliance Repair (independent Fisher & Paykel repair — not an official manufacturer service center) for a written estimate after diagnosis.
Frequently asked questions
A power-cycle may clear a transient glitch, but a returning 86 means the cause is still present. Do not open panels to “reset” electronics.
No. This is independent repair guidance from Fisher & Paykel Appliance Repair. For official wording use Product Help and your model’s docs.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.