Fisher & Paykel Gas Burner Won’t Light: The Point Where Clicking Becomes a Gas-Safety Problem
A burner that clicks without lighting may have a wet or mis-seated cap, but persistent gas odor changes the situation immediately. The goal is not to keep testing ignition until something catches.
If a Fisher & Paykel gas burner clicks but does not light, the first things to look at are a wet or misplaced burner cap, a dirty ignitor, and whether the dial was turned fully. Any smell of gas ends the troubleshooting: turn the burner off and follow gas-safety guidance instead of trying again. A burner that still will not light after those external checks needs a technician.
A burner that clicks without lighting may have a wet or mis-seated cap, but persistent gas odor changes the situation immediately. The goal is not to keep testing ignition until something catches.
Safe checks that stay outside the appliance
- Turn the affected control off.
- Allow removable burner parts to cool before cleaning or reseating them.
- If persistent gas odor is present, ventilate and follow appropriate gas-safety/emergency guidance instead of continuing ignition tests.
The checks should stay owner-accessible and model-appropriate. Do not remove live electrical panels, bypass door or lid switches, work on internal gas components, open sealed refrigeration systems, or remove a microwave/coffee-machine electrical enclosure just to “see what is wrong.”
Clicking, no clicking, or a gas smell
| Symptom | What it can point to | What you can check |
|---|---|---|
| Clicking, no flame | Dial not turned fully to HI, a dirty or wet ignitor, wet or clogged burner parts, or a cap that is not flat | For the gas cooktop in one guide, turn the burner off, wait 1 minute for gas to disperse, and retry with the dial fully at HI |
| No clicking, indicator halos dark | A loss of power to the cooktop | The guide for that model says halos and auto re-ignition do not work in a power failure and not to use the cooktop |
| No clicking, halo red | A dirty or wet ignitor | Let the area dry and clean the ignitor as the manual describes |
| Uneven or yellow flame | Spills dried on the flame ports, or wet burner parts | Follow the cleaning steps in your manual and keep burner parts dry |
| Gas smell | An unlit or leaking gas path | Stop and use the manual’s gas-smell instructions |
Stop conditions
Internal switches, igniters, valves, regulators, wiring, and gas-pressure checks are technician work. Do not keep cycling the burner when unburned gas is present.
Other stop conditions include smoke, sparking, burning electrical odor, repeated breaker trips, uncontrolled overheating, persistent unburned gas odor, or water reaching electrical connections.
A problem that disappears after cooling or a reset can still require service if the same safety symptom returns.
What should you do if you smell gas at the cooktop?
The guide for one Fisher & Paykel gas-on-steel cooktop says not to light any appliance, not to touch electrical switches, and not to use a phone inside the building. It tells you to call the gas supplier from a neighbor’s phone, or the fire department if the supplier cannot be reached. Check the wording in the guide for your own cooktop.
The same guide treats a strong gas smell, clicking with no ignition, uneven or yellow flames, and a flame that will not re-ignite as the cases that send you to its troubleshooting section after the burner is off.
Protect the home and preserve evidence
If water is present, limit spread into flooring/cabinetry without reaching into energized spaces. If an appliance is very hot, allow safe cooling instead of forcing a latch or panel. If gas odor persists, do not continue ignition testing.
Photograph any displayed code or warning before power is removed when it is safe to do so.
Read Oven and Gas Cooktop for related context.
Does a clicking burner mean the ignitor has failed?
Clicking means the ignitor is sparking when the dial is pressed and turned to HI, and the guide says that if there is no clicking there is no spark. A burner that sparks but does not catch can still be wet, dirty, or poorly seated, so the click alone does not identify the failed part. The guide recommends cleaning ignitors at least monthly with a toothbrush dipped in denatured alcohol, and keeping burner parts dry because wet parts cause an irregular flame.
Model and Installation Context
Fisher & Paykel has used different product generations, control platforms, and installation formats. The exact model number matters before a technician applies a code meaning, service procedure, or parts reference.
For built-in or integrated gas cooktop installations, cabinet clearances and access can also influence what you see. Leave the appliance installed unless the service team specifically asks you to move it. Unplanned extraction can damage flooring, cabinetry, panels, water connections, gas connections, or wiring.
What to Record Before Service
Write down:
– the complete model number;
– the exact symptom in one sentence;
– when it began;
– whether the symptom is constant or intermittent;
– what related function still works normally;
– any displayed code or message before resetting power;
– any recent cleaning, installation, power, water, gas, or ventilation event.
Those details are often more useful than a guess at the failed part.
Installation and Product-Family Context
Gas cooking complaints need both symptom detail and a clear safety boundary. Identify the affected burner, whether the spark is present, whether the flame is delayed, and whether another burner behaves normally. That comparison helps distinguish a local burner assembly issue from a broader ignition or gas-supply problem.
Do not adjust internal valves, regulators, switches, or gas pressure. If gas odor persists, stop normal troubleshooting and follow appropriate gas-safety guidance.
Avoid Turning One Problem Into Two
Do not keep operating an appliance through a leak, gas odor, repeated breaker trip, severe overheating, grinding mechanical condition, or rising refrigeration temperature just to gather more evidence. One clear observation is enough when the next test would increase risk.
Likewise, avoid removing panels, bypassing switches, changing internal adjustments, or ordering parts before the exact model and failure path are confirmed. Protect the original symptom so the technician can test the appliance in the condition that actually needs repair.
Burner lighting questions
Why does my burner click but not light?
The guide for one gas cooktop lists a dial not turned fully to HI, a dirty or wet ignitor, a gas valve that is off, wet or clogged burner parts, and a cap that is not sitting flat.
How long should I wait before trying the burner again?
The guide for that cooktop says to turn the burner off and wait 1 minute for gas to disperse before retrying. If you smell gas at any point, do not retry.
Can I use the cooktop during a power outage?
The guide for one gas-on-steel model says the halos and auto re-ignition do not work during a power failure and advises against using the cooktop. Your model’s manual is the place to confirm that.
Related Fisher & Paykel Resources
Frequently asked questions
Not when the intermittent condition involves gas odor, smoke, sparking, burning smell, water near electricity, severe overheating, or repeated breaker trips.
No. Internal electrical testing is not a homeowner check.
Record what happened. If the safety-related symptom returns, do not rely on repeated resets.
More from the guides
Water Leaking From a Fisher & Paykel Built-In Coffee Machine: When to Stop Using It
Built-in coffee machines combine water, heaters, pumps, controls, and mains power in a compact cabinet. A drip tray that needs emptying is different from unexplained water inside cabinetry…
Water Around a Fisher & Paykel DishDrawer: When a Leak Becomes an Electrical Risk
A small amount of water in a normal sump area is different from water escaping into cabinetry or reaching electrical connections. When water leaves the drawer or base…
Fisher & Paykel Refrigerator Warming Up: Protect Food First, Diagnose Second
A refrigerator cooling problem becomes a food-storage decision before it becomes a parts decision. The first priority is to confirm temperature and protect perishable food while you determine…
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.