Fisher & Paykel Series 11 CI122DB1 Induction Cooktop
12" induction cooktop from the Series 11 line — model notes, common issues and related Fisher & Paykel induction cooktop service.
Model overview
On an induction cooktop like the CI122DB1 from Fisher & Paykel, the first sign many owners notice is a pan that suddenly will not register on the display. The zone may show a symbol, refuse to heat or switch off after a few seconds. Before calling, try a flat pan with a magnetic base and check that it sits centered on the zone. A touch control that flickers or an error code on one zone is another clue to record. This 12 inch unit is compact, so the technician often starts with the controls and the cookware before looking at the power supply. Households across the metro areas we cover can help by writing down which zone failed. In the booking form, enter CI122DB1, the symptom and any code shown.
At a glance
| Model | CI122DB1 |
|---|---|
| Appliance | 12-inch induction cooktop |
| Common symptoms | Pan not registering, zone refusing to heat or switching off after a few seconds, flickering touch control, zone error code |
| What you can check | Try a flat pan with a magnetic base, centered on the zone, and write down which zone failed and any code on it. |
| When to call a technician | Book a visit if the zone still ignores a suitable pan or the controls keep flickering, since the technician then checks the power supply. |
CI122DB1 is a Fisher & Paykel 12″ induction cooktop from the Series 11 line. The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Dimensions | Width is 11 13/16 inches. |
|---|---|
| Features | Two induction cooking zones are provided. SmartZone joins the zones for larger cookware. PowerBoost is available. Pan detection is included. Hot-surface indicators are provided. |
| Controls | Controlled exclusively through the primary modular cooktop touchscreen. |
| Finish | Black glass finish. |
What sets the CI122DB1 apart
This is an auxiliary module, so it has no standalone controls and runs only through the primary modular cooktop touchscreen. Two induction zones join into one SmartZone for larger cookware, and PowerBoost is available for faster heat. Pan detection and hot-surface indicators are included, so the owner can see when a surface is still hot after cooking.
Service notes for the CI122DB1
Because this module has no controls of its own, a fault that looks local is often in the primary cooktop touchscreen or the link between the two. A technician checks that connection first, then the induction coil and pan detection, since a zone that will not heat often comes down to cookware or wiring. Cookware not detected usually means the pan is not induction-compatible, so the owner can test with a magnet before the visit. Before the visit, clean the glass, make sure the pan base is flat and magnetic, and note which zone fails and whether the primary cooktop shows an error. Switch the primary cooktop off at the breaker before removing any panel.
Questions about the CI122DB1
Where do I find the CI122DB1 model number?
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Use the full number, including any letters at the end.
Do you repair the Fisher & Paykel CI122DB1 on site?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
What should I note before the visit?
Note which burner or zone fails and whether the others still work normally.
Common issues for this model
- Cookware not detected (induction)
- Igniter keeps clicking
- Error code on one zone
- Touch controls flicker or lock out
Related error codes
Fisher & Paykel Cooktop F213-F216 and E36 Code: Sensor Error
Sensor error codes from the freestanding cooker article, which lists no owner fix other than a service booking.
Fisher & Paykel Cooktop E4 Code: Overheating or Board Fault
Three Fisher & Paykel documents, one practical answer for E4: let everything cool, cut power, restart.
Fisher & Paykel Cooktop EA Code: Board or Sensor Fault
EA has different labels and different handling depending on whether the appliance is a cooktop or a cooker.
Fisher & Paykel Cooktop E45 Code: Temperature or Power Issue
E45 gets a one-minute power-off reset; if it returns, the article says to book service.
Recommended repair service
Induction Cooktop Repair
Induction zone not heating or detecting cookware? We diagnose Fisher & Paykel induction cooktops precisely.
Troubleshooting resources
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.