Fisher & Paykel Cooktop F213-F216 and E36 Code: Sensor Error
Sensor error codes from the freestanding cooker article, which lists no owner fix other than a service booking.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F213 / F214 / F215 / F216 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The freestanding cooker article groups F213, F214, F215, F216 and E36, plus EA and E2, under sensor error.
The listing
F213, F214, F215, F216 and E36 are labeled sensor error in the Fisher & Paykel support article about F, A, E and U codes on freestanding cookers. EA and E2 share that label.
At a glance
| Code | F213 / F214 / F215 / F216 … |
|---|---|
| What it means | F213, F214, F215, F216 and E36 are sensor errors on freestanding cookers, as are EA and E2. |
| What you can check | Switch the cooker off and let the oven get completely cool. Write the code down and double-check it, since F213 and F215 are easily confused. For F215 and F216 only, one 30-second power-off is worth a try once everything has cooled. |
| When to call a technician | Arrange service, as no sensor is named and the other codes have no owner step. Avoid cutting power while the oven is too hot, which may damage the oven and nearby cabinets. |
| Topic | What the source says |
|---|---|
| The sensor concerned | Unnamed |
| Differences between the five codes | None given |
| Owner reset | None; the article says to book a service repair for codes it does not otherwise cover |
| Turning off power | Warns against it while the oven is too hot, as that may damage the oven and nearby cabinets |
One conflict to be aware of
The article also lists F215 and F216 under electronic board or software errors. That group has a reset: the cooling fans must have stopped and the oven be completely cool, then the supply is switched off for 30 seconds before restarting. For these two numbers, a single attempt could be worthwhile once everything has cooled. The other three codes have no reset. Nothing in the article resolves the overlap.
Sensors in general
Sensors in ovens and cooktops are small parts that report a temperature or condition to the control. A missing or out-of-range reading can make the control show a code and perhaps stop heating. The numbers here are not tied to any place in the article, so this remains general background.
Your part
- Switch the cooker off and let the oven get completely cool.
- Write the code down and double-check it, since F213 and F215 are readily confused.
- Find the model details, then arrange service.
Related
- EA and E2 belong to the same sensor list.
- The board-error list also includes F215 and F216.
Cooker repair by metro area
Booking for Fisher & Paykel cookers in the Miami, New York, Houston, Los Angeles and San Diego metro areas goes through (844) 659-2290. Give the exact code and say if the oven was being used when it appeared. See also the induction cooktop repair page.
Source: Fisher & Paykel Support: F, A, E or U displaying on Freestanding Cooker
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.