Fisher & Paykel Cooktop A1-A7, EX05, EX01 Code: Overheating
On a modular cooktop these nine codes mean overheating, and the listed remedy is a clear display and a 30-minute rest.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so A1-A7 / EX05 / EX01 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
In its modular cooktop support article, Fisher & Paykel gives A1 to A7, EX05 and EX01 the same label: overheating error.
Nine different codes, one label. For the Fisher & Paykel modular cooktop, the support article lumps A1, A2, A3, A4, A5, A6, A7, EX05 and EX01 together as an overheating error. Seeing an unfamiliar combination of letters and digits on the display can be unsettling, but the manufacturer gives them a single treatment.
At a glance
| Code | A1-A7 / EX05 / EX01 |
|---|---|
| What it means | A1 to A7, EX05 and EX01 are all treated as one overheating error on the modular cooktop. |
| What you can check | Clear any cookware from over the display and power button. Hold the power button until the unit is off, let it rest for 30 minutes, then power it on again. |
| When to call a technician | If the same code comes back after the 30-minute rest, book a service repair, because there is nothing else you can do at home. |
| Displayed | Meaning given |
|---|---|
| A1 to A7 | Overheating error |
| EX05 and EX01 | Overheating error |
Which number is which is not explained, so treat them as one fault and do not try to rank them.
Reset sequence
- First, glance at the glass. Cookware over the display or the power button is the first item the article asks you to exclude.
- Keep the power button pressed until the unit is off.
- Let it rest for 30 minutes. The tips in the article mention that some codes need the cooktop fully cooled before its electronics reset.
- Power it on again.
When the same code comes back, the article says to book a service repair and lists nothing else an owner can do.
Where pans should sit
Heat near the controls is part of what the cooktop watches. Keeping pans over the cooking zones, not over the display or power button, is the simplest habit to adopt.
Related codes
- F1, F2, F3: a voltage error in the same article, cleared with a 30-second power-off instead.
- EX03, EX04 and the F4 to F13 range: board or software errors that go directly to service.
Induction cooktop service across our metro areas
We handle Fisher & Paykel cooktop calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas; the number is (844) 659-2290. Have the displayed code ready, and mention whether the 30-minute rest was done. More about this kind of work is on the induction cooktop repair page.
Source: Fisher & Paykel Support: F, A or E displaying on Modular Cooktop
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.