Fisher & Paykel Cooktop E21 Code: Temperature, Power or Board
The same E21 is a temperature or power issue on one article and a board or software error on another, each with its own restart.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so E21 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fisher & Paykel files E21 as a temperature or power issue for full-surface induction cooktops and as a board or software error for freestanding cookers.
Two Fisher & Paykel support articles mention E21, and they do not agree on the reset. Decide first whether you have a stand-alone induction cooktop or a freestanding cooker.
At a glance
| Code | E21 |
|---|---|
| What it means | A temperature or power issue on stand-alone induction cooktops, or an electronic board or software error on freestanding cookers. |
| What you can check | On an induction cooktop, switch off at the power supply, wait one minute and restart, and keep good ventilation around it. On a cooker, let the fans stop and the oven cool, then cut power for 30 seconds. |
| When to call a technician | If E21 returns after the restart, book a service repair. No cause is given that you could find or fix, and live electronics are not for home repair. |
If it is a stand-alone induction cooktop
The full-surface induction article lists E21 as a “temperature or power issue”, with E2, E45 and U400. The group’s remedy is brief. Switch the cooktop off at the power supply, give it one minute, and start it again. A tip in the same article: make sure the cooktop has good ventilation around it, so it does not overheat.
If it is a freestanding cooker
The cooker article puts E21 in the “electronic board or software error” list, which also covers many F1xx, F2xx and F6xx numbers. There is a condition attached.
- Let the cooling fans stop and the oven cool completely.
- Switch off at the power supply and count 30 seconds.
- Switch on again.
Power cut while the oven is still too hot can harm the oven and the cabinets next to it, according to the article, so the waiting step stays.
What follows
- Code gone: use the appliance normally.
- Code back: both articles advise booking a service repair. No cause is given that an owner could find or fix, and live electronics are not for home repair.
Further reading
Where we repair cooktops and cookers
Our coverage for Fisher & Paykel appliances is the Miami, New York, Houston, Los Angeles and San Diego metro areas. A persistent E21 can be reported on (844) 659-2290; give the code, which restart you used and the model information. See the induction cooktop repair page too.
Source: Fisher & Paykel Support: E6, ER62 or ER21 on full surface induction cooktop; Support: F, A, E or U on Freestanding Cooker
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.