Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Cooktop and Cooker Board Error Codes: EX, F, Er and E Series

Error code EX03 / EX04 / EX06 / EX07 …
Appliance Cooktop
Quick answer

Which reset applies to a board or software error depends on the appliance type; the codes below are sorted by article.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so EX03 / EX04 / EX06 / EX07 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Three Fisher & Paykel support articles give these codes the label electronic board or software error, each with its own remedy.

How the codes are grouped

  1. Find your code in the tables below.
  2. Note the appliance type of that table.
  3. Follow only that table’s instruction.

Fisher & Paykel does not discuss the numbers individually. All of them carry the same label, electronic board or software error.

At a glance

Code EX03 / EX04 / EX06 / EX07 …
What it means Three Fisher & Paykel support articles give these codes the label electronic board or software error, each with its own remedy.
What you can check Find your code in the table for your appliance type and follow only that instruction. Cooktops on full surface need a one-minute power-off; cookers need the oven cold, then 30 seconds off.
When to call a technician Modular cooktops have no owner reset and go straight to service; the others need a repair if the code returns after the restart. Keep the appliance closed and report the exact code.

Modular cooktops: straight to service

Codes
EX03, EX06, EX08, F4, F6, F8, F11, F13
EX04, EX07, EX09, F5, F7, F9, F12

No owner reset is listed; the article tells you to book a service repair.

Full-surface induction cooktops: one minute without power

Codes
E7, EC, EE, Er13, Er22, Er35, Er58, Er63, Er66
Eb, Ed, Er21, Er31, Er47, Er61, Er65

Switch the cooktop off at the supply, wait 1 minute and switch it on. A reappearing code calls for a repair booking.

Freestanding cookers: cool, then 30 seconds

Codes
F101, F103, F105, F194, F198, F203, F211, F218
F102, F104, F193, F196, F199, F204, F212, F226
F403, F418, F428, F608, F613, F634, Er50, A401, E5, E20, E31
F404, F427, F603, F610, F615, ADC, A201, E6, E22

Wait until the cooling fans have stopped and the oven is completely cold. Next, switch off at the power supply for 30 seconds, then restore it. If the code comes back, book a repair.

The stricter rule on cookers

Do not switch off the supply unless instructed, says the cooker article, because a too-hot oven may be damaged and so may the cabinetry near it. For some codes the whole appliance must cool first so the electronics are also cool when reset. Patience here costs nothing.

What stays unknown

Not one of the articles identifies a faulty part for these codes. Make no assumption about a particular element, board or sensor, and keep the appliance closed. Useful for a call: the exact code, the time of the first appearance, and any change after a reset.

Further pages

  • E4 and E1 have their own pages although some articles file them as board errors too.
  • F213 to F216 with E36 form the sensor group; F215 and F216 appear in both lists.

Repair for board codes in Miami, New York, Houston, Los Angeles and San Diego

Our number for Fisher & Paykel repair in those metro areas is (844) 659-2290. Name the table your code came from and the restart you tried. See the induction cooktop repair page for the service itself.

Source: Fisher & Paykel Support: F, A or E displaying on Modular Cooktop; Support: E6, ER62 or ER21 on full surface induction cooktop; Support: F, A, E or U on Freestanding Cooker

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis