Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Cooktop E3 Code: Hot Cooktop or Unsuitable Pan

Error code E3
Appliance Cooktop
Quick answer

Check the pan with a magnet, then cool the cooktop and restart: that covers both meanings of E3.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E3 means overheating in Fisher & Paykel care guides and non-induction cookware in its support articles.

Two answers to one code

  • Owner care guides (CI365, CI304, CI244, CI122, CI905, CI804, CI604 and CI302 series): the cooktop has become too hot.
  • Support articles for the CI926DTB4 full-surface model and for freestanding cookers: the pan is unsuitable for induction.

The pan takes seconds to rule out, so begin there.

At a glance

Code E3
What it means Either the cooktop has overheated or the pan is unsuitable for induction, depending on the model.
What you can check Hold a magnet to the bottom of the pan; if it does not cling, use a different pan. Otherwise switch off, let the cooktop cool, restart, and keep pots on the rear zones with good ventilation around.
When to call a technician If E3 keeps returning with a pan that passes the magnet test and a cooled cooktop, write the code down and call a trained technician.

Is the pan suitable?

Hold a magnet to the bottom of the pan. If it clings, induction will work with that pan. If it does not cling, the pan is the whole problem and no repair is needed; use a different one. The care guides add one more point from their troubleshooting section: a pan that is too small, or not centered over the zone, also heats poorly.

When the pan is fine

Treat E3 as overheating:

  1. Switch off. Give the cooktop time to cool, and then restart it, per the guides.
  2. Recall the position of your cookware. Pots along the front edge are named in the guides as a cause of the display blacking out from overheating; the rear zones are the recommended spot.
  3. Ensure the cooktop has good ventilation around it.
  4. Resume with a lighter load.

Expect sluggish behavior just after an overheat. The guides describe a reduced-power mode that the cooktop uses to protect itself as it cools down.

E3 again and again

A pan that passes the magnet test, a cooled cooktop and a returning E3 together are the cue to write the code down and reach out to Customer Care or a trained service technician, the way the guides advise.

Related pages

  • E4 is the second overheating code in the owner guides.
  • Er62 is about pan placement rather than pan material.

Cooktop service, five metro areas

For Fisher & Paykel induction cooktop service in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 659-2290. Tell the dispatcher how the magnet test went and what you changed before E3 came back. The induction cooktop repair page gives an overview.

Source: Fisher & Paykel Induction Cooktop Care and Maintenance; Induction Cooktop Care Guide 433271A; Support: E6, ER62 or ER21 on full surface induction cooktop; Support: F, A, E or U on Freestanding Cooker

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis