Fisher & Paykel Cooktop F1, F2, F3 Code: Voltage Error
Three codes, one voltage error, one 30-second reset.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F1 / F2 / F3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F1, F2 and F3 share the label voltage error in the modular cooktop support article, with a 30-second power-off reset.
Same fault, three numbers
F1, F2 and F3 all appear under voltage error in the modular cooktop article. No difference between them is described, so writing about each separately would add nothing.
At a glance
| Code | F1 / F2 / F3 |
|---|---|
| What it means | F1, F2 and F3 are voltage errors on the modular cooktop. |
| What you can check | Isolate the cooktop at the supply, since pressing its own button does not count, wait half a minute and reconnect. Do not remove the cover or lift the cooktop from its cutout. |
| When to call a technician | If the code repeats after the reset, book a service repair. Note which number showed and any power problems at home; only an electrician should probe the incoming voltage. |
The reset
Isolate the cooktop at the supply; pressing its own button does not count. Let half a minute go by, then reconnect. That is the end of the owner’s part. A repeat of the code means booking a service repair, says the article.
What “voltage” tells you
Only the label itself. The article does not cover the cause.
Before calling
Note down which of the three numbers was shown, whether it came back after the restart, and the model details printed on the cooktop.
Do not
- remove the cover or lift the cooktop from its cutout;
- cycle the power again and again when the code keeps coming back;
- probe the incoming voltage unless you hold electrician qualifications.
Nearby codes
- A1 to A7, EX05 and EX01 form the overheating group of that article, which asks for a half-hour rest.
- EX03, EX04 and F4 to F13 are board errors that have no reset at all.
Voltage errors: service across our metro areas
We take Fisher & Paykel cooktop calls for the Miami, New York, Houston, Los Angeles and San Diego metro areas on (844) 659-2290. Have the code and model details ready and mention any power problems at home. Our induction cooktop repair page covers the service.
Source: Fisher & Paykel Support: F, A or E displaying on Modular Cooktop
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.