Fisher & Paykel Series 11 CIT122DX1 Induction Cooktop
12" induction cooktop (teppanyaki) from the Series 11 line — model notes, common issues and related Fisher & Paykel induction cooktop service.
Model overview
A teppanyaki style induction cooktop such as the CIT122DX1 from Fisher & Paykel has a wide cooking surface, so safe checks start with the power supply and the surface itself. Make sure nothing metal sits on the controls, keep the surface clear of spills and confirm the unit is level in its opening. Test with a flat, magnetic pan to see whether the display recognizes it. If the controls flicker or an error code appears on one zone, note which part of the surface it was. Do not run the cooktop with a damaged pan. Homes in the Miami, New York, Houston, Los Angeles and San Diego metro areas can make the first call clearer by describing these checks. Include CIT122DX1, the symptom and any code in the booking form.
At a glance
| Model | CIT122DX1 |
|---|---|
| Appliance | 12-inch teppanyaki induction cooktop |
| Common symptoms | Pan not recognized, flickering controls, error code on one part of the surface |
| What you can check | Keep the controls and surface clear of metal and spills, confirm the unit is level, and test with a flat magnetic pan. Never run it with a damaged pan. |
| When to call a technician | Request a technician if the display still will not recognize a good pan or an error code keeps appearing on one area of the surface. |
CIT122DX1 is a Fisher & Paykel 12″ induction cooktop (teppanyaki) from the Series 11 line. The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Dimensions | Width is 11 13/16 inches. |
|---|---|
| Power | Supply is 208/240 V, 60 Hz. |
| Installation | Designed to pair with a Primary Modular Induction Cooktop. |
| Features | Two induction elements heat the cooking surface. Food cooks directly on the surface. Hot-surface indicators are included. |
| Controls | Temperature adjustment spans 170°F to 430°F. |
| Finish | Stainless steel finish. |
What sets the CIT122DX1 apart
Food cooks directly on the surface, so this module works as a teppanyaki griddle rather than a pot station. The temperature range runs from 170 to 430 degrees F, which covers searing and gentle warming on the same plate. It is built to pair with a primary modular induction cooktop, so it adds cooking space without controls of its own.
Service notes for the CIT122DX1
A surface that will not heat or cycles off is first checked on the primary cooktop, because this module is driven through it. Touch controls that flicker or lock out point to the connector and the control board on the primary side. An error code on one zone usually means that element or its wiring needs a test, so the code goes on the booking form. Cookware not detected is often a warped base or a pan that is not induction-compatible, which the owner can test with a magnet. Before the visit, clean the surface, confirm the power supply is on at the breaker, and note which element fails. Cut the supply at the breaker before taking off any cover.
Questions about the CIT122DX1
Where do I find the CIT122DX1 model number?
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Use the full number, including any letters at the end.
Do you repair the Fisher & Paykel CIT122DX1 on site?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
What should I note before the visit?
Note which burner or zone fails and whether the others still work normally.
Common issues for this model
- Error code on one zone
- Igniter keeps clicking
- Touch controls flicker or lock out
- Cookware not detected (induction)
Related error codes
Fisher & Paykel Cooktop E40 Code: Power Supply Error
E40 is a power supply error with no owner step; booking service is the only listed remedy.
Fisher & Paykel Cooktop E45 Code: Temperature or Power Issue
E45 gets a one-minute power-off reset; if it returns, the article says to book service.
Fisher & Paykel Cooktop and Cooker Board Error Codes: EX, F, Er and E Series
Which reset applies to a board or software error depends on the appliance type; the codes below are sorted by article.
Fisher & Paykel Cooktop EA Code: Board or Sensor Fault
EA has different labels and different handling depending on whether the appliance is a cooktop or a cooker.
Recommended repair service
Induction Cooktop Repair
Induction zone not heating or detecting cookware? We diagnose Fisher & Paykel induction cooktops precisely.
Troubleshooting resources
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.