Fisher & Paykel Cooktop E40 Code: Power Supply Error
E40 is a power supply error with no owner step; booking service is the only listed remedy.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so E40 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fisher & Paykel places E40 and U400 together as a power supply error in its freestanding cooker support article.
Power supply error is the entire description Fisher & Paykel gives for E40. It sits in the support article covering F, A, E and U codes on freestanding cookers, next to U400 and nothing else. Below is what the article does and does not provide.
At a glance
| Code | E40 |
|---|---|
| What it means | E40 is a power supply error on freestanding cookers, shown alongside U400. |
| What you can check | This code has no owner reset. Write it down exactly as shown, note whether other appliances or lights lost power, and leave the supply on while the oven is hot. |
| When to call a technician | Book a service repair, since there is no owner step and opening panels would not be safe. Give the technician the code and any power interruption you noticed. |
| Question | Answer in the article |
|---|---|
| Does E40 have its own reset? | No. Resets are written for door lock errors, the induction cookware message and board or software errors only. |
| What should an owner do? | Book a service repair, as for all other fault codes. |
| What causes it? | Not stated. Supply trouble outside the cooker and a fault within it are both conceivable. |
| Can I cut power? | Only if instructed. If the oven is too hot, doing so may damage it and the cabinets around it. |
Useful preparation
- Write the code down just as it appears, since the tips say to have it when booking.
- Notice whether other appliances or lights lost power; that is worth telling the technician.
- Leave the supply switched on while the oven is hot.
Why this one is for a technician
With no owner step in the manufacturer’s text, there is no reason to open panels, and doing so would not be safe.
See also
- U400 shares the category here, but a different article labels it otherwise.
- E1 is where to go if your cooktop’s guide treats a power supply problem as a quick connection check.
Cooker service in our metro areas
E40 calls from the Miami, New York, Houston, Los Angeles and San Diego metro areas are taken on (844) 659-2290. Mention the code, the model details and any power interruption you noticed. The induction cooktop repair page is another place to start.
Source: Fisher & Paykel Support: F, A, E or U displaying on Freestanding Cooker
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.