Fisher & Paykel Oven F226 Code: Isolation Hardware Fault
F226 is an isolation hardware fault on the combi oven. Cool, reset, then book service if it comes back.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F226 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F226 is listed by Fisher & Paykel as an isolation hardware fault on its combi oven.
The combi oven table from Fisher & Paykel lists F226 as isolation hardware fault. Cool the oven down, restart its power after a minute, and book service if F226 returns.
At a glance
| Code | F226 |
|---|---|
| What it means | F226 is an isolation hardware fault, a problem in the separation between high-voltage and low-voltage parts. |
| What you can check | Make sure the oven is completely cool and the cooling fan has stopped. Switch off at the power supply, leave it off for one minute, then switch on and check the display. |
| When to call a technician | If F226 returns after the restart, schedule a service visit. Keep your hands out of the cabinet, since a technician needs test equipment to find the affected part. |
Explaining the wording
Isolation, in electronics, means the separation between high-voltage parts and low-voltage control circuits. That is the extent of what the table says. Without testing, there is no way to know which part of your oven is affected, and the entry comes with no cause, part or model list.
The reset, step by step
- Confirm the oven is completely cool.
- Confirm the cooling fan has stopped.
- Turn off the power at the supply and leave it off for one minute.
- Turn it on and check the display.
Safety
Because the manufacturer gives only a label, there is every reason to keep your hands out of the cabinet. A technician can test it with the right equipment.
The manufacturer’s reset note requires the oven to be completely cool and the cooling fan to be stopped before the power is cut.
Other entries
- F230: electronic error, with no reset step.
- F211, F212, F218 and F219: power board errors.
Oven service in five metro areas
Call (844) 659-2290 for the Miami, New York, Houston, Los Angeles and San Diego areas. Say which code appeared and that restarting did not hold, and have the model number ready. The oven repair page gives details.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.