Fisher & Paykel Oven F329: Cavity Over-Temperature
F329: the combi oven reads its cooking chamber as too hot. Cool down and call for service.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F329 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F329 is the combi oven fault for an over-temperature cavity, and the maker points to a service call.
The manufacturer’s table describes F329 as a cavity over-temperature fault on the Fisher & Paykel combi oven. Put plainly, the control believes the chamber where food cooks has gone above its limit. The direction that goes with it is one line long: book a service call.
At a glance
| Code | F329 |
|---|---|
| What it means | F329 is the combi oven fault for an over-temperature cavity, and the maker points to a service call. |
| What you can check | Stop the cooking function and keep children and pets clear of the front. Do not open the door unless there is smoke, add water, or run another cycle. Let the oven cool by itself. |
| When to call a technician | Call for a service visit, as the code points to one and a restart is not advised here. Report the code, what was in the oven and the setting, if you remember it. |
Handling a hot oven
- Stop the cooking function.
- Do not open the door unless there is smoke; children and pets should be kept clear of the front.
- Do not add water or force the temperature down. Cooling must happen by itself.
These points are general good sense and not taken from the manufacturer. Hot air and steam can scald.
Why we do not suggest restarts
Several codes in the table list a restart; F329 has none attached. An over-temperature report concerns how the oven controls heat, so repeatedly switching the power off and on to see whether it clears is not advised here.
Cause
None is given. In principle the sensing side or the heating side could be responsible, but a technician has to test to find out.
When the oven has cooled, leave it unused rather than trying another cycle. Pass on the code, what was in the oven, and the setting if you remember it.
Compare with these
- F213, F214 and F229, cavity sensor errors.
- A1, a general oven-overheated entry from another line.
Where we repair
We handle Fisher & Paykel oven repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 and say F329; the oven repair page lists what we cover.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.