Fisher & Paykel Oven F330, F403, F404 and Other Software Errors
F330, F403, F404, F411, F418-F424 and F426-F429 are software errors with a one-minute power reset.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F330 / F403 / F404 / F411 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
These fifteen combi oven codes are listed with one shared meaning, software error, and a common reset-then-service step.
The fifteen codes
If your Fisher & Paykel combi oven shows one of the numbers below, it falls under a single entry:
At a glance
| Code | F330 / F403 / F404 / F411 … |
|---|---|
| What it means | These fifteen combi oven codes all mean a software error. |
| What you can check | Cool the oven completely and let the fan stop. Switch off at the power supply, wait 60 seconds, then switch on and read the display. If a different code shows, write down each number. |
| When to call a technician | If the code returns after the restart, a service visit is needed. Tell the technician every code you saw, in order. |
| Group | Codes |
|---|---|
| Single | F330, F411 |
| Pair | F403, F404 |
| Run of seven | F418, F419, F420, F421, F422, F423, F424 |
| Run of four | F426, F427, F428, F429 |
All carry the same meaning in the manufacturer’s table: software error.
Instruction from the table
For the whole block, switch the oven off at the power supply, leave it for one minute, and restart. A returning code means booking a service call. The source offers no way to tell these numbers apart by cause.
Steps in order
- Cool the oven completely.
- Let the cooling fan finish and stop on its own.
- Switch off at the supply and wait 60 seconds.
- Switch on and read the display.
According to the opening note on the manufacturer’s page, the cooling conditions must be satisfied first, before any power is cut.
Different code afterwards?
Record each number you see, in sequence, and mention them all when you call.
Related lists
- F203 and F603, general software errors.
- F204, a user interface that is not responding.
- The freestanding cooker list, which groups F403, F404, F418, F427 and F428 with board errors.
Oven repair by metro area
For Fisher & Paykel oven repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas, phone (844) 659-2290 and read out the code. See the oven repair page for more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.