Fisher & Paykel DD24D4I2 Integrated Double DishDrawer Dishwasher
Integrated double DishDrawer dishwasher; owners usually report water left in a drawer or a cycle that will not start.
Model overview
The DD24D4I2 is an integrated double DishDrawer dishwasher from Fisher & Paykel with two separate drawers, each able to take its own load. Together they hold 14 place settings, and six wash programs cover everyday loads. Fan-assisted drying finishes each drawer, and three-stage filtration keeps the wash clean. The concealed touch interface sits behind the panel, and the drawers support custom and accessory handles. Across the metro areas we cover, the frequent calls are dishes that come out damp and a drawer that will not start. For the booking form, give the symptom, the complete model string, and the program that failed.
At a glance
| Model | DD24D4I2 |
|---|---|
| Appliance | Integrated Double DishDrawer Dishwasher |
| Common symptoms | water left in the tub after the cycle; dishes not getting clean or dry; cycle stops early or will not start; door latch or control panel problems |
| What you can check | Note the cycle used, whether water is left in the tub, and any code or flashing light. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Width: 23 9/16 inches. |
|---|---|
| Capacity | Holds 14 place settings. |
| Installation | Supports custom and accessory handles. |
| Features | Two independently operated drawers. Six wash programs. Fan-assisted drying. |
| Controls | Concealed touch interface. |
| Care | Three-stage filtration. |
What sets the DD24D4I2 apart
Two drawers in one panel-ready unit mean a small load can run in one drawer while the other waits, so the washer is not tied to a full rack. The concealed touch interface hides the controls when the front is closed, which keeps the panel uniform. Custom and accessory handles let a cabinet maker match the front to the rest of the run.
Service notes for the DD24D4I2
A load that comes out with water left in the tub usually points to the drain pump, a clogged drain filter or a drain hose that has kinked, and a technician checks those in that order. Dishes that come out soiled or damp need the spray arm and drying fan checked before the control board. A cycle that stops early or will not start often traces to the drawer latch, which tells the controller the drawer is closed. Before the visit, the owner can clean the filters, check that each spray arm turns freely, and confirm the drawer shuts until it clicks. Switch the dishwasher off at the breaker before reaching into the tub.
The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
How many place settings does the DD24D4I2 hold?
It holds 14 place settings across its two drawers, with six wash programs.
Does the DD24D4I2 support custom panels?
Yes. It supports custom and accessory handles, so a cabinet maker can match the front to the rest of the kitchen.
Where do I find the full DD24D4I2 model number?
Check the rating label on the edge of the door or the side of the tub, visible when the door is open. Copy every letter and digit, including the ones at the end.
Do you repair the Fisher & Paykel DD24D4I2 at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Water left in the tub after the cycle
- Dishes not getting clean or dry
- Cycle stops early or will not start
- Door latch or control panel problems
Related error codes
Fisher & Paykel DishDrawer A09 Code: Sanitize Cycle Too Cool
A09 is a temperature shortfall in the sanitize cycle on DD*C DishDrawers. Check the supply, clear, rerun.
Fisher & Paykel DishDrawer U4 Code: Fault on the Other Drawer
U4 is only a notice. The code that matters is on the other drawer.
Fisher & Paykel DishDrawer F1 Code: Flood Detected
F1 means flood detected or excess foaming. Steps for a wet floor and for a dry drawer.
Fisher & Paykel DishDrawer E9 Code: Controller Fault
E9 is a controller electronics fault. Reset once, note the second number, and call if it stays.
Recommended repair service
DishDrawer Repair
DishDrawer not draining, not filling, leaking, or showing a fault code? We diagnose Fisher & Paykel drawer dishwashers.
Troubleshooting resources
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.