Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel DishDrawer U4 Code: Fault on the Other Drawer

Error code U4
Appliance DishDrawer Dishwasher
Quick answer

U4 is only a notice. The code that matters is on the other drawer.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so U4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

A fault on the second drawer prevents this drawer from being used; the U4 drawer itself is not faulty.

Two drawers share one DishDrawer unit, and U4 shows up on the one that is not broken. Fisher & Paykel is clear that the U4 drawer has no fault. It simply cannot run while the other drawer carries a fault.

At a glance

Code U4
What it means A fault on the second drawer prevents this drawer from being used; the U4 drawer itself is not faulty.
What you can check This drawer is not faulty. Go to the other drawer, read its code and follow the steps for that code. Once that fault is cleared, U4 should no longer apply.
When to call a technician If U4 returns with nothing shown on the other drawer, or the fault persists, disconnect the power and water and book a service visit. Report the code on both drawers.

Quick answers

Is the drawer with U4 damaged?
No. The guide says plainly it is not faulty.

Can I run it anyway?
The guide says U4 prevents use of that drawer until the other drawer’s problem is dealt with.

What do I do?
Go to the other drawer and attend to its fault code, which is the Classic guide’s own instruction.

Step by step

  1. Read the code on the second drawer’s panel, and on its display if there is one.
  2. Find that code in the guide and follow it.
  3. Once the second drawer’s fault is gone, U4 should no longer apply.

How the Classic flowchart treats it

For all U-codes the opening is identical: stop the beeping, check the table for the code and note it. With U4, the following step is to ignore this drawer and work on the code showing on the other. The chart reaches the final step only when the fault persists: disconnect power and water, then contact Customer Care with the code.

Example of how two codes can appear together

Imagine the lower drawer shows U1 as the water tap is closed, while the upper one displays U4. Turning the tap on and clearing U1 resolves both, as described on the U1 page. This is just an example of the rule; the guide does not list which codes appear with U4.

Where to go next

The other drawer shows Read
An electronics E-code or F-code F9, the wash controller
FC or EC FC, communication between the drawers
An A-code for instance A3

If the second drawer is blank

The sources are silent here. Switch the unit off at the power supply, wait a few seconds, and switch it back on. Should U4 return with nothing on the other drawer, report precisely that, because it contradicts what the guide describes.

DishDrawer service across our metro areas

Fisher & Paykel DishDrawer service covers the Miami, New York, Houston, Los Angeles and San Diego metro areas; call (844) 659-2290 and give both drawers’ codes along with your model number. Details of the work are on the DishDrawer repair page.

Source: Fisher & Paykel DishDrawer user guide (590199D); DishDrawer DD24 and DD60 user guide (590030A)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis