A3 means the drawer cannot drain; look for a kinked or blocked hose or a blocked pipe connection.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so A3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A3 is Fisher & Paykel's drain fault for a DishDrawer, pointing to a blocked or kinked hose or a blocked drainage pipe connection.
A3 appears when a DishDrawer drawer cannot drain. The manufacturer’s description has two parts: the drain hose might be blocked or kinked, and the connection to the drainage pipe might be blocked. That is the extent of the causes it lists.
At a glance
| Code | A3 |
|---|---|
| What it means | A3 is Fisher & Paykel's drain fault for a DishDrawer, pointing to a blocked or kinked hose or a blocked drainage pipe connection. |
| What you can check | Press Start/Pause once to silence the beeper, then inspect the drain hose for kinks or blockage and check where it joins the drain pipe. Press Start/Pause to clear the fault, then again to restart. |
| When to call a technician | If the problem is more than a visible kink or clog, or the hose needs replacing, a technician should handle it. Switch the power off before reaching in. |
Steps, hose first
- One press of Start/Pause silences the beeper. Let the dishwasher sit briefly.
- Inspect the hose leaving the dishwasher. It must not be kinked or blocked.
- Inspect where the hose attaches to the drain pipe, as the guide mentions a blockage at that connection.
- Press Start/Pause to clear the fault, then press it again to restart the program.
Fisher & Paykel’s support article words that check as: “check that the drain hose and plumbing connection are not blocked or kinked”.
If you own a double
Both drawers in a DishDrawer double work independently and may fault independently. Look for the flashing drawer indicator to find the affected one, and use the scroll button to read each drawer’s code. The guide adds that the unaffected drawer remains usable.
Containing the water
Standing water in the drawer is no emergency, though a backed-up hose can spill when it is disconnected. A shallow pan and towels under the connection will catch it, and the power should be off before you reach in. If the problem is more than a visible kink or clog, including a hose that needs replacing, a technician should handle it.
Codes close to A3
- A20: the not-draining code from a separate support article, including filter cleaning.
- A1: a supply that is not delivering any water.
Drain fault service in our metro areas
People in the Miami, New York, Houston, Los Angeles and San Diego metro areas can call (844) 659-2290 about Fisher & Paykel DishDrawer repair. Mention A3, the drawer concerned, and anything you noticed along the hose.
Source: Fisher & Paykel DishDrawer DD24DAX9 / DD24SAX9 User Guide; Support: A-code displaying on DishDrawer Dishwasher
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.