Fisher & Paykel DishDrawer A1 Code: Water Supply Fault
A1 signals a water supply fault. Open the supply and clear the code with Start/Pause.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so A1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A1 is Fisher & Paykel's water supply fault for the DishDrawer, cleared with the supply on and Start/Pause.
Fisher & Paykel’s instruction for A1 is brief: ensure the water supply is turned on. After that you clear the fault at the control. The code describes a DishDrawer that is not getting the water it expects.
At a glance
| Code | A1 |
|---|---|
| What it means | A1 is Fisher & Paykel's water supply fault for the DishDrawer, cleared with the supply on and Start/Pause. |
| What you can check | Make sure the water tap feeding the dishwasher is open. Then press Start/Pause to stop the beeping, press it again to clear the fault, and press it once more to resume the wash program. |
| When to call a technician | If A1 returns while the tap is open, book a service visit. On a double model, press the scroll button first and jot down the code each drawer shows. |
Signs of a fault on the machine
For the DD24DAX9 and DD24SAX9, the user guide pictures a fault as constant beeping with the code flashing in the display. With a double model the drawer indicator flashes as well, and the lit indicator marks the drawer at fault. Its neighbour can carry on as long as it has no fault itself.
Clearing A1
- Go to the water supply tap for the dishwasher and make sure it is open.
- Press Start/Pause. This stops the beeping.
- Press Start/Pause again. This clears the fault.
- Press Start/Pause once more to resume the wash program.
A program that carries on and fills means the fault has cleared. If the tap had been closed by a plumber, or by accident, that is probably all there was to it.
No second cause on record
Neither source offers a further cause for A1, so there is no concealed checklist. This is a supply fault and not a drainage one, so the blocked hose checks that go with A3 are not part of it. If A1 returns while the tap is open, press the scroll button on a double model to see each drawer’s code, jot them down, and contact Customer Care or a technician, in line with the guide.
Related codes
- A3: the matching fault for water that will not leave the drawer.
- A09: another code where checking the supply comes first.
Where to get DishDrawer repair help
Our team handles Fisher & Paykel DishDrawer service in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 if A1 persists with the supply open, and have the model number, the code and your steps ready.
Source: Fisher & Paykel DishDrawer DD24DAX9 / DD24SAX9 User Guide; Support: A-code displaying on DishDrawer Dishwasher
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.