Fisher & Paykel DishDrawer FC Code: Drawers Not Communicating
FC means the two drawers cannot communicate. No owner reset is listed.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so FC / EC may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Communication fault between the two drawers.
What FC says
When a DishDrawer reports FC, its drawers have stopped talking to each other. Support’s F-code article labels the fault “communication fault between drawers” and lists it among those requiring a technician.
At a glance
| Code | FC / EC |
|---|---|
| What it means | Communication fault between the two drawers. |
| What you can check | There is no owner reset for FC and nothing for you to check inside, so leave the cabinet shut. Note which drawer shows the code and whether each drawer can still open, take water and wash. |
| When to call a technician | This fault needs a technician. Report the code on each drawer and whether both show it at once; running one drawer by itself and noting how it behaves also helps. |
Names for the same fault
EC, “electronics fault – communication between drawers”, is how Classic panels show it. FC is the later label.
Notes to take
- The fault code, and the code on each drawer if the unit is a double.
- Whether each drawer can still open, take water and wash.
- Whether both drawers show the code at once.
Which drawer shows it is the useful detail for service.
Missing information
The sources list no reset for FC. They do not describe what links the drawers either, so there is no cable or board for you to check. Treat it as work for a technician and leave the cabinet shut.
Single versus double
FC belongs to double units, because a model with one drawer has no partner to talk to. Whether the code shows at power-up or mid-cycle is not covered by the guide. If possible, run one drawer by itself, see whether it behaves, and pass that on to the service desk.
Mistaking it for U4
U4 is a healthy drawer on hold while its partner is faulty, and resolving the partner’s code clears it. With FC, the connection between the pair is what has failed.
Also see
- F9: electronics of the wash controller
Two-drawer DishDrawer repair by metro area
We service double DishDrawers in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Ring (844) 659-2290 and tell us what each drawer displays and whether either still works.
Source: Fisher & Paykel Support, F-code displaying on DishDrawer
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.