Fisher & Paykel Washer 57
When 57 appears on a Fisher & Paykel Washer, the safest path is: observe, do only the listed checks, then stop if the code returns. Platform context: SmartDrive top-load washer — legacy fault codes.
Content status: Verified
57 · Washer — cautious homeowner guidance for this display reading (verify for your serial).
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 57 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fisher & Paykel may reuse display labels across generations. For 57 on SmartDrive top-load washer — legacy fault codes, compare the on-screen text with your model’s error table.
Symptoms you may notice
- The washer display shows 57 during or after a wash cycle.
- The cycle may pause, stop early, or fail to start while 57 is shown.
- The machine may not fill, agitate, spin, or drain normally while the fault is active.
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check that the lid or door is fully closed (and locked, on models with a lid/door lock).
- Confirm the water supply taps are fully open and hoses are not kinked or restricted.
- Check that the drain hose is not kinked and the drain/standpipe is clear.
- Confirm the load is not overloaded or unbalanced.
- Switch the washer off at the wall, wait about 60 seconds, then switch back on and retry once.
- Record the full model and serial number from the rating plate.
Important safety warning. Do not open internal panels, remove covers, or access wiring, the motor, or the control board. Do not bypass the lid/door safety switch. If you notice water pooling near electrical parts, a burning smell, or sparks, switch off power at the wall and call a professional immediately.
When to call a technician
Persistent 57 usually needs hands-on testing. Contact Fisher & Paykel Appliance Repair (independent Fisher & Paykel repair — not an official manufacturer service center) for a written estimate after diagnosis.
Frequently asked questions
Try only the safe checks listed here and a single wall-power restart. If 57 returns, stop DIY — the underlying condition needs a proper diagnosis.
Use charts only as orientation. Confirm against Fisher & Paykel Product Help or the manual printed for your model before acting.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.