F5: the internal lid has a fault. Restore power once, then book service if it persists.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F5 / E5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Internal lid fault, listed as a lid motor fault in the support article.
The lid and F5
An internal lid closes off the wash area in a DishDrawer, and F5 reports a problem with it. Wording differs: “lid fault” in the DD24/DD60 guide, the lid motor in the support article.
At a glance
| Code | F5 / E5 |
|---|---|
| What it means | An internal lid fault, described in some documents as a lid motor fault. |
| What you can check | Switch the unit off or unplug it, wait a few seconds, then reconnect the power and see whether the code is still there. Do not pry the drawer open or push on the lid. |
| When to call a technician | If F5 is still showing after the restart, arrange a service visit. Tell the technician whether the drawer opens and what the second drawer displays. |
Guide instruction
The older guide offers a single action, which is to reconnect power (plug in, or switch on at the supply) because the fault may reset. No explanation follows, so it counts as a single attempt.
- Disconnect power by switching off or unplugging.
- Wait for a few seconds.
- Reconnect and see if the code is still there.
If it does not clear
Support lists F5 with the codes that call for a service technician. No document suggests prying the drawer open, pushing the lid or dismantling the drawer, and you should do none of it.
A loading problem looks different
If a dish sticks up and the lid cannot close, the display shows U2, not F5. In that case the load is at fault rather than the lid motor.
Same line for three codes
Three codes, F5, F6 and F7, have one shared entry in the older guide, and the advice under F6 and F7 is the same reconnect-power step, whichever you see.
Quick question
Is it all right to open a stuck drawer by hand?
Attempt it the way the Designer-model flowchart describes, with no excessive force, and nothing further.
Lid repair across our metro areas
We cover lid faults on DishDrawers in the Miami, New York, Houston, Los Angeles and San Diego metro areas. If F5 is still showing after the restart, ring (844) 659-2290 and tell us whether the drawer opens and what the second drawer is displaying.
Source: Fisher & Paykel DishDrawer DD24 and DD60 user guide (590030A); Fisher & Paykel Support, F-code displaying on DishDrawer
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.