Fisher & Paykel DD24DT4PX2 Tall Double DishDrawer Dishwasher
Professional tall double DishDrawer; typical trouble is a cycle that stops early or a leak-protection code on the panel.
Model overview
The DD24DT4PX2 is a Professional tall double DishDrawer dishwasher from Fisher & Paykel, with two drawers that together hold 14 place settings. Six wash programs run either drawer, and the concealed touch interface keeps the front clean. Fan-assisted drying finishes the load, and three-stage filtration catches debris before it reaches the spray. Its professional proud handles set the front apart from a flush panel. Across the metro areas we cover, most calls involve a cycle that stops early or water left in a tub. For the booking form, give the symptom, the complete model string, and any leak-protection code shown.
At a glance
| Model | DD24DT4PX2 |
|---|---|
| Appliance | Tall Double DishDrawer Dishwasher |
| Common symptoms | cycle stops early or will not start; water left in the tub after the cycle; leak or leak-protection code; door latch or control panel problems |
| What you can check | Note the cycle used, whether water is left in the tub, and any code or flashing light. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Width: 23 9/16 inches. |
|---|---|
| Capacity | Holds 14 place settings. |
| Features | Two independently operated drawers. Six wash programs. Fan-assisted drying. Three-stage filtration. Professional proud handles. |
| Controls | Concealed touch interface. |
What sets the DD24DT4PX2 apart
Professional proud handles are what distinguish this model from the Contemporary models in the same range. Two drawers mean a smaller load can run in one drawer without filling the other. Three-stage filtration keeps debris out of the spray arms, so the filters are the first check when dishes come out gritty.
Service notes for the DD24DT4PX2
Cycles that stop early or will not start usually trace to a drawer latch that does not register, a control fault or a power interruption, so a technician checks the latch and control panel first. Water left in the tub points to a drain pump, a drain hose or a filter that has clogged, and each is checked in turn. A leak-protection code means the unit has detected water, so the tub and base need a dry inspection before the controls are blamed. Before the visit, the owner can clear the filters, check that the drawer closes fully, and make sure the drain hose is not kinked. Switch the dishwasher off at the breaker before reaching under the drawer.
The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
How many place settings does the DD24DT4PX2 hold?
It holds 14 place settings across its two drawers, which suits a busy household.
Does the DD24DT4PX2 have proud handles?
Yes. It has professional proud handles, which give the front a panel-ready look.
Where do I find the full DD24DT4PX2 model number?
Check the rating label on the edge of the door or the side of the tub, visible when the door is open. Copy every letter and digit, including the ones at the end.
Do you repair the Fisher & Paykel DD24DT4PX2 at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Cycle stops early or will not start
- Water left in the tub after the cycle
- Leak or leak-protection code
- Door latch or control panel problems
Related error codes
Fisher & Paykel DishDrawer A7 Code: Excess Foam Detected
A7 means excess foam was detected and the dishwasher started auto recovery. Leave it to finish.
Fisher & Paykel DishDrawer FC Code: Drawers Not Communicating
FC means the two drawers cannot communicate. No owner reset is listed.
Fisher & Paykel DishDrawer E3 Code: Temperature Sensor Fault
E3 is a temperature sensor fault; the guide mentions a 65 C (149 F) limit and a tempering valve.
Fisher & Paykel DishDrawer U4 Code: Fault on the Other Drawer
U4 is only a notice. The code that matters is on the other drawer.
Recommended repair service
DishDrawer Repair
DishDrawer not draining, not filling, leaking, or showing a fault code? We diagnose Fisher & Paykel drawer dishwashers.
Troubleshooting resources
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.