Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel DishDrawer U6 and A6 Codes: Spray Arm

Error code U6 / A6
Appliance DishDrawer Dishwasher
Quick answer

A6 on newer panels and U6 on Classic ones: the spray arm or low water pressure.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so U6 / A6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Spray arm loosened or detached from its mounting, or insufficient water pressure.

The code depends on the panel: Classic models show U6, newer ones show A6. Fisher & Paykel gives both the same meaning. Either the spray arm has worked loose or come off its mounting, or water pressure is too low.

At a glance

Code U6 / A6
What it means Spray arm loosened or detached from its mounting, or insufficient water pressure.
What you can check Open the drawer and check that the spray arm is seated firmly and turns freely. Press start/pause once to stop the beeping, again to clear the fault, and a third time to resume the program.
When to call a technician If the arm is fine and the code returns, low water pressure is the likely cause. Fitting a valve on the supply is plumbing work, so leave it to a technician or plumber.

Compare the two

Item U6 A6
Where it appears Classic models Newer A-code models
Cause Spray arm loose or off, or low water pressure
What you do Refit the arm so it spins freely, clear the fault, resume

The refit, in the order the A6 guide gives it

  1. Open the drawer and check on the spray arm, the rotating arm in the bottom that throws water at the dishes.
  2. A loose or detached arm gets refitted: seat it firmly and make sure it turns freely.
  3. One press of start/pause stops the beeping; a second press clears the fault.
  4. Press start/pause again and the wash program picks up where it was.

On the Classic U6 flowchart the first question is the same. If the arm has loosened or detached, refit it as the maintenance instructions describe, close the drawer and press the button to resume.

When the arm is not the problem

With the arm properly in place, the Classic guide concludes that water pressure is low. It mentions that a “4 litre” valve may be required on the water supply. Fitting one is a plumbing job, so leave it to a technician or plumber.

Where the refit steps are printed

Neither fault table includes the refit procedure itself. Look in User maintenance instructions in the Classic guide, or in Maintenance in the A6 guide. If your printed copy is missing, Customer Care can supply one.

FAQ

Is cancelling the program necessary?
No. Resume it with start/pause after the fix.

It returns even though the arm is tight.
Water pressure is the next suspect according to the sources, and the Classic flowchart says to disconnect and call.

Related codes

  • U1 (no water; one guide ties it to the spray arm too)
  • A1 (water supply fault)
  • A3 (drain hose problem)

DishDrawer repair in our metro areas

Fisher & Paykel DishDrawer repair is available around Miami, New York, Houston, Los Angeles and San Diego. Call (844) 659-2290 with the code and a note of whether the spray arm was loose when you looked; the DishDrawer repair page explains more.

Source: Fisher & Paykel DishDrawer user guide (590199D); DD24DAX9 / DD24SAX9 user guide (592815A); Fisher & Paykel Support, A-code

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis